This kit has the options of:

4 x 640 watt heads; with

2x Flash Triggers

4x Flash Receivers

2x 64 inch (1400mm) soft silver or white PLM Umbrella

2x 51 inch (1140mm) white PLM Umbrella

4x – front diffusers to make the umbrella a softbox

Einstein™ Flash Unit
PART NUMBER – E640
OVERVIEW
The Einstein™ Flash Unit features action stopping flash durations, color consistency, and the broadest power range. The flexibility of the power range allows for everything from over-powering the sun, to shooting indoor portraits with a wide-open aperture.

Perfect for: Professional photographers in any field.

FEATURES

9 f-stop power variability (2.5 Ws to 640 Ws)
Adjustable in precise 1/10 f-stops
All-digital control from LCD display
Global plug-and-play from 95 to 265 VAC
Action stopping flash durations as short as 1/13,500 sec. (t.1)
Color consistency +/- 50K at any power
Bright, adjustable 250 W modeling lamp
Frosted dome cover reduces UV emission
Audible and visual recycle indicators
PRODUCT SPECS
Einstein™ Flash Unit
Watt seconds 640 Ws
Power Variability 9 f-stops (full to 1/256 power)
Recycle to Full 1.7 sec.
Flash Duration (t.5) 1/2000 sec. (at full power)
Flash Duration (t.1) – in Action Mode 1/588 sec. (at full power) | 1/13,500 sec. (at 1/256 power)
Flash Duration (t.1) – in Color Mode 1/588 sec. (at full power) | 1/8,000 sec. (at 1/256 power)
Power Requirements Automatic power switching from 95 to 265 VAC, 50/60 Hz (no lamp change or user attention required)
Average Current Draw Brief initial recycle surge current of 8.5A; average draw of 8A
Sync / Trigger Voltage Less than 5 volts (safe for use with DSLR cameras)
Modeling Lamp 250 W, 120VAC bayonet-style quartz bulb
Flashtube 12mm flashtube (daylight-balanced and UV-coated
LCD Display Back-lit, high-resolution color LCD. 320×240 pixels; 2.4 in.
Stand Mount Fits stands up to 5/8 in.
Umbrella Mount Accepts umbrella rods up to 9mm
Weight 4 lbs. 5 oz.
Dimensions 7 in. (height) x 5.4 in. (diameter) x 7.8 in. (length)
Dimensions Note: length measurements taken from the front of the shipping cover (in place on the unit’s faceplate) to the back panel; height measurements taken from the top of the umbrella screw to the bottom of the light stand top coupler, folded back underneath the unit; width measurements taken from side to side at the widest points

Compatible with all BUFF light modifiers, light stands, CyberSync™ remotes, and Vagabond™ systems

Cyber Commander™
1440

PART NUMBER – CC
OVERVIEW
The Cyber Commander™ allows for wireless triggering of flash units. Additional features include:, adjusting the outputs of both the flashbulb and modeling light directly from the camera position, grouping certain lights in a setup together, as well as naming the individual lights in the setup. Last, but certainly not least, the Cyber Commander™ even has a built in light meter!
FEATURES
Use on the camera hotshoe or handheld when the CyberSync™ trigger transmitter (CST2) is attached to the camera
Up to 400′ of wireless working range via radio frequency (2.4 GHz band)
16 frequencies to choose from
16 available channels, providing complete control of up to 16 different flash units
8 slots available for grouping of different flash units in a setup
Adjusts both flash power and modeling lights in 1/10 f-stop increments
Built-in light meter measures individual lights, groups, or all lights together
Stores and retrieves over 50 complex lighting setups
Compatible with the CyberSync™ Plus Model Receivers (CSR+ or CSRB+) when used with AlienBees™ or White Lighting™ flash units
Compatible with the CyberSync™ Transceiver (CSXCV) when used with DigiBees™ or Einstein™ flash units

TECHNICAL SPECS
Cyber Commander™
Dimensions 2 in. (width) x 4.75 in. (height – including antenna) x 0.75 in.(depth)
LCD Screen Dimensions 1.5 in. (width) x 2 in. (height)
System Frequency Range 16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
System Encoding Secure 256-bit binary encoded packet, with validity verification
System Latency 1/4000 typical delay from closing of camera contact to receiver sync output signal
Battery Life 6.5 to 8.5 hours under normal use with premium alkaline batteries (uses two AAA alkaline or lithium batteries)
Sync Voltage Less than 4 Vdc

CyberSync™ Transceiver
1467

PART NUMBER – CSXCV
OVERVIEW
The CyberSync™ Transceiver is designed for use with Einstein™ flash units. The transceiver fits into the receptacle located on each flash unit. This forms an all-digital interface between the flash unit and the Cyber Commander™. The Transceiver is powered by the flash unit that it is connected to with the frequency and channel selection being made on the back panel of the flash unit.
FEATURES
All-digital Transceiver
Compatible with Einstein™ flash units ONLY
Can be used with the CyberSync™ Trigger Transmitter (CST2) for wireless firing
Full adjustment and wireless firing when used with the Cyber Commander™
NOT compatible with AlienBees™ or White Lightning™ flash units
DIMENSIONS / TECHNICAL SPECS
CyberSync™ Transceiver
Dimensions 1 in. (width) x 2.75 in. (height) x 0.375 in.(depth)
System Frequency Range 16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
System Encoding Secure 256-bit binary encoded packet, with validity verification
System Latency 1/4000 typical delay from closing of camera contact to receiver sync output signal
Sync Voltage Up to 300 Vdc from a connected flash unit

64” White PLM™ Umbrella
1009

PART NUMBER – PLM64U-W-8MM
OVERVIEW
The White PLM™ umbrella can be used as a shoot-through, diffused light source or a soft, bounced light source. It provides a wide, unfocused spread of light covering a 150° area for close, low specularity lighting with large round catchlights and very soft shadows.

FEATURES
White fabric for shoot-through or bounce use
Provides unfocused lighting over a 150° area
Provides soft shadows with perfect round catchlights
Easy to use pop open umbrella style with 8mm rod
Less than +/- 150K color temperature shift
Meticulously designed arc shape for even light
Compatible with all Paul C. Buff™ flash units or any flash unit that has an umbrella adapter that will support an 8mm umbrella rod.
ARRIVES WITH
(1) translucent white assembled umbrella with 8mm umbrella shaft
(1) Black nylon umbrella sleeve
PRODUCT SPECS
PLM64U-W-8MM
Arc Measurement 64 in. (across the arc from tip to tip)
Diameter 54 in. (across the open face)
Collapsed 33.5 in. (closed umbrella from top to bottom)

64” Soft Silver PLM™ Umbrella
1021
PART NUMBER – PLM64U-SS-8MM
OVERVIEW
The Soft Silver PLM™ umbrella is perfect for everyday use with various subjects as it bounces the light from the flash unit, retaining high efficiency with a wide angle of coverage. The soft silver fabric produces a controlled, feathered falloff with very soft shadows, perfectly round catchlights and an added specular punch over the white PLM™ umbrellas.

FEATURES
Soft silver bounce interior with black exterior
Highly efficient output (4 times the output of a softbox)
Controlled coverage with a feathered fall-off
Provides soft feathered shadows with perfect round catchlights
Easy to use pop open umbrella style with 8mm rod
Less than +/- 150K color temperature shift
Meticulously designed arc shape for even light
Compatible with all Paul C. Buff™ flash units or any flash unit that has an umbrella adapter that will support an 8mm umbrella rod.
ARRIVES WITH
(1) Soft silver assembled umbrella with 8mm umbrella shaft
(1) Black nylon umbrella sleeve
PRODUCT SPECS
PLM64U-SS-8MM
Arc Measurement 64 in. (across the arc from tip to tip)
Diameter 54 in. (across the open face)
Collapsed 33.5 in. (closed umbrella from top to bottom)
OUTPUT SPECS
64″ Soft Silver PLM™ on an Einstein™ Flash Unit
Output at 14′ f16 (ISO 100)
Coverage 12′
Color Temperature 5600K (0K Color Shift) Tint 1M
64″ Soft Silver PLM™ w/ White Front Diffusion Fabric on an Einstein™ Flash Unit
Output at 14′ f8 +4/10 (ISO 100)
Coverage 160°
Color Temperature 5450K (-150K Color Shift) Tint 1M

51” White PLM™ Umbrella
1030
PART NUMBER – PLM51U-W-8MM
OVERVIEW
The White PLM™ umbrella can be used as a shoot-through, diffused light source or a soft, bounced light source. It provides a wide, unfocused spread of light covering a 150° area for close, low specularity lighting with large round catchlights and very soft shadows.

FEATURES
White fabric for shoot-through or bounce use
Provides unfocused lighting over a 150° area
Provides soft shadows with perfect round catchlights
Easy to use pop open umbrella style with 8mm rod
Less than +/- 150K color temperature shift
Meticulously designed arc shape for even light
Compatible with all Paul C. Buff™ flash units or any flash unit that has an umbrella adapter that will support an 8mm umbrella rod.
ARRIVES WITH
(1) translucent white assembled umbrella with 8mm umbrella shaft
(1) Black nylon umbrella sleeve
PRODUCT SPECS
PLM51U-W-8MM
Arc Measurement 51 in. (across the arc from tip to tip)
Diameter 43.75 in. (across the open face)
Collapsed 27 in. (closed umbrella from top to bottom)

Link to video for how to use the Cybercommander can be found HERE ( https://youtu.be/Zw9LoKstVsg )

NOTE: All the above information is courtesy of the www.paulcbuff.com website. Gold Coast Camera Hire is not responsible for any differences in information above and the actual rented product. Gold Coast Camera Hire has taken all reasonable steps to ensure the accuracy of the information provided.