Gold Coast Camera Hire
Filter
Sort By
Quantity Available: 1
24 Hour Rate: $154
Weekend Rate: $264
Weekly Rate: $616
Quantity Available: 1
24 Hour Rate: $22
Weekend Rate: $38.50
Weekly Rate: $88
Quantity Available: 1
24 Hour Rate: $198
Weekend Rate: $330
Weekly Rate: $792
Quantity Available: 1
24 Hour Rate: $154
Weekend Rate: $264
Weekly Rate: $616
Quantity Available: 1
24 Hour Rate: $88
Weekend Rate: $154
Weekly Rate: $352
Quantity Available: 1
24 Hour Rate: $44
Weekend Rate: $77
Weekly Rate: $176
Quantity Available: 1
24 Hour Rate: $66
Weekend Rate: $110
Weekly Rate: $264
Quantity Available: 1
24 Hour Rate: $33
Weekend Rate: $55
Weekly Rate: $132
Quantity Available: 1
24 Hour Rate: $44
Weekend Rate: $77
Weekly Rate: $176
Quantity Available: 1
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66
Quantity Available: 1
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66
Quantity Available: 4
24 Hour Rate: $33
Weekend Rate: $55
Weekly Rate: $132
Quantity Available: 2
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66
Quantity Available: 7
24 Hour Rate: $11
Weekend Rate: $19.80
Weekly Rate: $44
Quantity Available: 1
24 Hour Rate: $11
Weekend Rate: $19.80
Weekly Rate: $44
Quantity Available: 1
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66
Quantity Available: 7
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22
Quantity Available: 2
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22
Quantity Available: 1
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66
Quantity Available: 2
24 Hour Rate: $11
Weekend Rate: $19.80
Weekly Rate: $44
Quantity Available: 1
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22
Quantity Available: 1
24 Hour Rate: $77
Weekend Rate: $132
Weekly Rate: $308
Quantity Available: 2
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22
Quantity Available: 1
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22
Quantity Available: 4
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22

The DJI RS 2 Pro Combo packs several additional accessories with the RS 2 gimbal to provide for a more comprehensive workflow. A key addition is the DJI Ronin RavenEye Image Transmission System, which allows for 330\\\\’ 1080p video transmission from the gimbal with a latency of only 50ms for on-set collaboration. The other extra accessories are a focus motor, phone holder, two focus gears, and three HDMI cables.

The RS 2 gimbal is a redesigned follow-up to the Ronin-S gimbal with a payload of up to 10 lb. It\\\\’s about 25% lighter and more compact thanks to monocoque carbon fiber axis arms and a shorter grip handle with a smaller battery cartridge, although still with a 12-hour runtime. The motors are about 20% more powerful and support cameras such as the Blackmagic Pocket 6K, Canon 1D X Mark III, Sony a7S III, and ALEXA Mini LF. Please see the most current camera and lens compatibility list on the DJI website.

The RS 2 also has a 1.4\\\\” full-color LCD touchscreen that allows you to access gimbal settings as well as features such as time-lapse and hyperlapse, which were previously accessible only via the companion mobile app.

The RS 2 uses the DJI Titan stabilization algorithm to provide improved stabilization with increased smoothness. In applications with up to 100mm zoom lenses, a built-in feature called SuperSmooth complements the algorithm by compensating for micromovements and increasing torque to achieve fluid motion (an optional lens support is required).

There are also two RSA ports with electrical contacts for dedicated accessories, and each port has a NATO mount for quick release attachment of these optional accessories. One RSA port is provided on the left and one on the right side of the gimbal. Supported accessories include a focus wheel, a twist-grip dual handle, and a universal mount for efficiently attaching the gimbal to a car, jib, or slider.

The companion iOS/Android Ronin app offers many creative features in addition to standard time-lapse and panorama functions. Time Tunnel combines roll motion with hyperlapse to \\\\”twist\\\\” space and time. Track allows you to create a repeatable camera movement path for a tightly choreographed shot. Force Mobile makes the gimbal follow your smartphone\\\\’s movements. Force Mobile can also be achieved with enhanced responsiveness when you use the included RavenEye transmission system. When you use the RavenEye, you can also display a live view of your subjects on the touchscreen when using the RavenEye\\\\’s ActiveTrack feature.

The RS 2 uses a dual-layer Manfrotto plus Arca-Swiss camera mounting system with two removable quick release plates. For social media content, the gimbal can be adjusted at the tap of a button to position your camera into portrait mode. To let you efficiently balance your camera, the RS 2 has an axis lock on each axis, so you can unlock and balance one axis at a time. Additionally, a fine-tune balancing knob allows you to further dial in the optimal balance for your camera.

The gimbal runs for up to 12 hours on a battery cartridge that secures to the included grip handle. The cartridge can easily be swapped out for another one, sold separately. The cartridge is rechargeable via a USB Type-C port on the grip, and the grip can be completely removed from the gimbal when you need to recharge the battery. The BG30 grip is compatible with the PD and QC 2.0 charging protocols. DJI highly recommends using a 24W charger, not included. The battery supports 24W fast charging and can be fully recharged in about 1.5 hours.

The RS 2 comes with a splash-proof carry case designed with dedicated compartments for the different parts of the gimbal and key accessories. A mini tripod is also included and attaches to a 1/4\\\\”-20 thread on the bottom of the grip handle to function as a stand or an extension handle for two-handed maneuvering of the gimbal in certain scenarios.

The RS2 kit includes the gimbal, case and all included accessories.

Quantity Available: 1
24 Hour Rate: $154
Weekend Rate: $264
Weekly Rate: $616

The DJI Osmo Mobile 2 carries over most of the features from the original version and offers several key improvements. It\’s a bit lighter. The motion ranges are expanded. And run-time is tripled to approximately 15 hours!

Mount any smartphone up to 3.3in wide and capture smooth footage in handheld operation. The Osmo Mobile 2 syncs up with an included DJI GO app to provide you with a comprehensive workflow consisting of multiple shooting modes and functions, including Portrait, Underslung, Flashlight, Time-Lapse, and Panorama.

Key Features

  • Supports up to 3.3in wide smartphones
  • Controllable Range: ±160° pan / ±155° tilt (horizontally mounted)
  • Mechanical Range: ±170° pan / -90 to 70° roll / ±170° tilt
  • Controllable Speed: 120°/s max
  • Battery: Up to 15-hour run-time / 18Wh capacity, 2600mAh
  • 1/4-20 tripod mount

DJI GO App

  • ActiveTrack technology built into the app allows the Osmo Mobile 2 to automatically keep your phone facing you as you move
  • Modes/Functions: Standard, Portrait, Underslung, Flashlight, Time-Lapse (on the move), Panorama
  • Live stream moments using YouTube Live
  • Take one-second long exposures to produce light trails, star trails, and dramatically blurred cars without a tripod
Quantity Available: 1
24 Hour Rate: $22
Weekend Rate: $38.50
Weekly Rate: $88

The KC-12 Crane from Kessler Crane is a lightweight camera crane system. It features anodized aluminum construction with dual support rails that make the crane twist resistant. An invertible camera platform enables standard or underslung camera capability. With 360° of horizontal rotation and a height range of 19 feet, the KC-12 Crane can be used to capture sweeping cinematic shots that you cant get by just raising your camera in your arm.

The KC-12 mounts to your tripod heads release plate for mounting on your tripod. The internal sleeve bearings provide smooth boom up and down action independent of your tripod head. The adjustable weight bar allows you to adjust the balance of your camera on the crane using readily available (but not included) household weight. The crane is very portable and is easily broken down for transportation or storage.

Modular

The KC-12 Crane includes the 4 foot extension that differentiates it from the KC-8 version. This extends the reach from 11 feet (bottom to top of arc movement) with the KC-8 to 19 feet with the KC-12 crane.

Tilt Control

Manual, fixed-angle, and automatic tilt control.

Adjustable Weight Bar

Allows you to adjust the balance of the rig on the fly. Weights can be added or removed (remember to secure and safety the rig before adding or removing weights), and the weight bar can be slid fore and back to fine tune your cranes performance.

Portable Disassembly

The crane is easy to disassemble.

K-Pod Tripod

The Kessler Crane K-Pod Tripod is a heavy-duty 100mm bowl system weighing a sturdy 22 lb and offering a 500 lb load capacity. Its designed to be suitable for cranes and standard tripod applications and is upgradeable for use on dolly tracks. A good choice for a head is the Kessler Crane Hercules 2.0, which supports a 150 lb payload.

The K-Pod Tripod features rigid double strut legs with Kesslers incremental Posi-Lock System that friction locks the legs as well as interlocks into incremental lock pockets. The lock pockets allow you to equally position the legs while providing a lock that will prevent any accidental slips from the lock position. The K-Pod also includes a pop-lock spreader that locks the legs in a pre-stressed position to eliminate instability in heavy load conditions, and acts as the frame system when the tripod is used in various dolly configurations. The legs are made of black-anodized aluminum and have a flat design with a powder-coated finish designed to prevent scratching and wear.

Kessler offers a wide range of accessories that upgrade the K-Pod Tripod for multiple uses in standard tripod and dolly system applications. The K-Pod comes with standard spin-out pad feet but can be upgraded with spiked feet, caster wheels, all-terrain wheels, dolly trucks, dolly seats, pushbars, and other K-Pod system accessories.

Key Features

  • Heavy-duty 100mm bowl system for cranes, dolly tracks, and standard applications
  • 500 lb load capacity
  • Rigid double strut legs
  • Incremental friction lock/interlock lock system
  • Pop-lock spreader designed to prevent instability with heavy loads
  • Includes pad feet
  • Upgradeable with spiked feet, caster wheels, dolly trucks, dolly seats, and more

Hercules Head

The Kessler Crane Hercules Head is a super-robust, solid aluminum pan and tilt head featuring a 100mm ball mount as well as 75mm fixed ring mount. Its compatible with both 100mm and 75mm bowl tripods and supports heavy-duty payloads up to 150 lb. Offering a flat surface on top with two 1/4-20 mounting threads, this head supports direct attachment of Kessler cranes and sliders (except for the 5 ft CineSlider for stability purposes), allowing thus for very stable connection. To mount a camera, you\\\\\\\\’ll just need an optional quick-release system that can be bolted into the 1/4-20 threads. You can use the Kessler Crane Kwik Release or Manfrotto 577 adapter/plate system.

This head features Kesslers Bio-Glide technology, which allows for very smooth pan and tilt movement — smoother than of standard fluid heads — and spring assisted drag control. Tilt can be pin-locked, allowing the head to function as a Kessler Fluid Swivel. A removable pan handle is included. A bubble level is built in.

Leveling is not supported on 75mm tripods because of 75mm system limitations in surface area.

Key Features

  • 100mm ball mount
  • 75mm fixed ring mount
  • Compatible with 100mm and 75mm bowl tripods
  • 150 lb payload
  • Flat surface with 1/4-20 threads supports cranes, sliders, and quick-release systems
  • Bio-Glide technology allowing for very smooth pan and tilt and spring assisted drag
  • Pin-lockable tilt
  • Includes pan handle
  • Built-in bubble level
  • Two thumb knobs included for attaching cranes
Quantity Available: 1
24 Hour Rate: $198
Weekend Rate: $330
Weekly Rate: $792

The KC-8 Crane from Kessler Crane is a lightweight camera crane system. It features anodized aluminum construction with dual support rails that make the crane twist resistant. An invertible camera platform enables standard or underslung camera capability. With 360° of horizontal rotation, the KC-8 Crane can be used to capture sweeping cinematic shots that you cant get by just raising your camera in your arm.

The KC-8 mounts to your tripod heads release plate for mounting on your tripod. The internal sleeve bearings provide smooth boom up and down action independent of your tripod head. The adjustable weight bar allows you to adjust the balance of your camera on the crane using readily available (but not included) household weight. The crane is very portable and is easily broken down for transportation or storage.

Tilt Control

Manual, fixed-angle, and automatic tilt control.

Adjustable Weight Bar

Allows you to adjust the balance of the rig on the fly. Weights can be added or removed (remember to secure and safety the rig before adding or removing weights), and the weight bar can be slid fore and back to fine tune your cranes performance.

Portable Disassembly

The crane is easy to disassemble.

K-Pod Tripod

The Kessler Crane K-Pod Tripod is a heavy-duty 100mm bowl system weighing a sturdy 22 lb and offering a 500 lb load capacity. Its designed to be suitable for cranes and standard tripod applications and is upgradeable for use on dolly tracks. A good choice for a head is the Kessler Crane Hercules 2.0, which supports a 150 lb payload.

The K-Pod Tripod features rigid double strut legs with Kesslers incremental Posi-Lock System that friction locks the legs as well as interlocks into incremental lock pockets. The lock pockets allow you to equally position the legs while providing a lock that will prevent any accidental slips from the lock position. The K-Pod also includes a pop-lock spreader that locks the legs in a pre-stressed position to eliminate instability in heavy load conditions, and acts as the frame system when the tripod is used in various dolly configurations. The legs are made of black-anodized aluminum and have a flat design with a powder-coated finish designed to prevent scratching and wear.

Kessler offers a wide range of accessories that upgrade the K-Pod Tripod for multiple uses in standard tripod and dolly system applications. The K-Pod comes with standard spin-out pad feet but can be upgraded with spiked feet, caster wheels, all-terrain wheels, dolly trucks, dolly seats, pushbars, and other K-Pod system accessories.

Key Features

  • Heavy-duty 100mm bowl system for cranes, dolly tracks, and standard applications
  • 500 lb load capacity
  • Rigid double strut legs
  • Incremental friction lock/interlock lock system
  • Pop-lock spreader designed to prevent instability with heavy loads
  • Includes pad feet
  • Upgradeable with spiked feet, caster wheels, dolly trucks, dolly seats, and more

Hercules Head

The Kessler Crane Hercules Head is a super-robust, solid aluminum pan and tilt head featuring a 100mm ball mount as well as 75mm fixed ring mount. Its compatible with both 100mm and 75mm bowl tripods and supports heavy-duty payloads up to 150 lb. Offering a flat surface on top with two 1/4-20 mounting threads, this head supports direct attachment of Kessler cranes and sliders (except for the 5 ft CineSlider for stability purposes), allowing thus for very stable connection. To mount a camera, you\\\\\\\\\\\\\\\\’ll just need an optional quick-release system that can be bolted into the 1/4-20 threads. You can use the Kessler Crane Kwik Release or Manfrotto 577 adapter/plate system.

This head features Kesslers Bio-Glide technology, which allows for very smooth pan and tilt movement — smoother than of standard fluid heads — and spring assisted drag control. Tilt can be pin-locked, allowing the head to function as a Kessler Fluid Swivel. A removable pan handle is included. A bubble level is built in.

Leveling is not supported on 75mm tripods because of 75mm system limitations in surface area.

Key Features

  • 100mm ball mount
  • 75mm fixed ring mount
  • Compatible with 100mm and 75mm bowl tripods
  • 150 lb payload
  • Flat surface with 1/4-20 threads supports cranes, sliders, and quick-release systems
  • Bio-Glide technology allowing for very smooth pan and tilt and spring assisted drag
  • Pin-lockable tilt
  • Includes pan handle
  • Built-in bubble level
  • Two thumb knobs included for attaching cranes
Quantity Available: 1
24 Hour Rate: $154
Weekend Rate: $264
Weekly Rate: $616

Kessler KC Lite 8.0 Jib

Make: Kessler

Model: Lite 8.0 Jib

 

PRODUCT HIGHLIGHTS

  • Single Support Rail Design
  • Aluminum Jib Arm Construction
  • 10 lb Load Capacity
  • 5′ Fulcrum to Camera Platform Distance
  • Mounts Onto Your Tripod Release Plate
  • Optional Vertical Brake Available
  • Optional Short Tip Available
Quantity Available: 1
24 Hour Rate: $88
Weekend Rate: $154
Weekly Rate: $352

Description
The amazingly advanced and totally re-engineered Glidecam HD-Series™ from Glidecam Industries represents the top of the line in hand-held Camera Stabilization.

The lightweight and state-of-the-art Glidecam HD-1000, HD-2000 and HD-4000 hand-held Camera Stabilizers will transform your hard to watch, shaky camera footage into hypnotically smooth, professional footage.

The Glidecam HD-Series offers advanced features and a degree of sophistication never before seen in a line of Hand-held Camera Stabilizers.

With the Glidecam HD-Series hand-held Stabilizers your camcorder seems to float, always balanced, isolated from your hands undesirable motions. Now you are free to move with your camera – panning, tilting, booming or running without any camera instability or shake.

The Glidecam HD-Series works so well that it allows you to shoot incredibly smooth and graceful shots even while going to extremes like running up and down stairs or traveling over rugged terrain. And when it comes to normal shooting, like walking or moving the camera slowly around someone, the results are equally magical.

Each HD-Series Stabilizer’s offset, foam cushioned, Handle Grip is attached to a free floating, three axis Gimbal. This allows your hand to move up and down, and side-to-side, thereby isolating your hand’s unwanted motions from the camera. This up and down movement alleviates the bouncing, pogo type action often associated with our competitor’s system because their handle cannot move up and down. This design feature, coupled with the overall higher inertia of the HD-Series systems, produces superior stabilization when compared with our competition.

A unique and proprietary, precision, three-axis Gimbal incorporates several adjustable, axis convergence controls. This allows all three axes to intersect for proper operational alignment.

A camera-mounting platform with a quick-release, no-tools, drop-on camera plate allows you to quickly attach or remove your camera. Ergonomic, control knobs allow quick, precise adjustment of the top stage’s back and forth, and side-to-side movement. These controls allow you to adjust the camera’s horizontal balance.

By varying the amount of Counter Weights on the Base Platform, or by changing the length of the no-tools telescoping Central Post, you adjust the camera’s vertical balance. When balanced properly the camera floats, ready for you to move into action.

The Glidecam HD Series stabilizers offer unparalleled controllability and ease of use with their unique rigid, yet dynamically adjustable, control and weight distribution surfaces. Setting up, controlling and adjusting system balance is now quick and precise.

A unique and proprietary Dynamic Base Platform can expand or contract. This allows you to easily adjust the systems dynamic balance or to increase or decrease the systems rotational pan inertia.
Features
Fine adjustment Dynamic Camera Balance Platform (Camera Mounting Platform)
Integrated quick-release Camera Plate
Adjustable convergence, precision, three-axis Gimbal
No-tools Telescoping Center Post
Adjustable dynamic balance and inertial-control Base Platform
Foam padded Handle Grip
Precision Bearings at all vital points
Made with precision Aluminum
Anodized Studio Black
Laser etched Labeling
Allows unrestricted Booming and 360 degree Panning
Rubber feet under Base Platform
Made in USA.

Quantity Available: 1
24 Hour Rate: $44
Weekend Rate: $77
Weekly Rate: $176

Product Description:

The GLIDECAM X-10 is a professional camera stabilization system designed for use with the Glidecam 2000 Pro, 4000 Pro, HD-2000, HD-4000, XR-2000 and XR-4000. The GLIDECAM X-10 system will allow you to walk, run, go up and down stairs, shoot from moving vehicles and travel over uneven terrain without any camera instability or shake.

Upgrades from Smooth Shooter
The X-10 comes with both sections of its support arm being able to move vertically, whereas the Smooth Shooter comes with only the front section of its support arm being able to move vertically. Also, the X-10 comes with a trimmable arm-to-vest connector, whereas the Smooth Shooter’s arm-to-vest connector is not trimmable.
Support Arm Movement
The GLIDECAM X-10’S support arm can be boomed up and down, as well as pivoted in and out, and side-to-side. It is the combined booming and pivoting action of the support arm that isolates your motions from the camera in a way that creates smooth camera footage.
Support Vest
The Glidecam X-10 support vest is lightweight, comfortable and can be adjusted to fit a wide range of operators. High endurance, dual density, EVA foam padding and integral T6 aluminum alloy create a vest which can hold and evenly distribute the weight of the system across the operator’s shoulders, back, and hips. For safety, quick release, high impact buckles allow the vest to be removed quickly.

 

Quantity Available: 1
24 Hour Rate: $66
Weekend Rate: $110
Weekly Rate: $264

Edelkrone Slider One
Make: Edelkrone
Model: Slider One

PRODUCT DESCRIPTION

A small amount of movement can go a long way to bringing a sense of depth to your shots. It is with this thought in mind that edelkrone built the SliderONE, a camera slider that trims excess length to deliver an ultra-compact option that fits into virtually any camera bag, so it’s always there when you need it. The slider features a belt-driven design for smooth operation and offers 6″ of camera travel, making it ideal for close-ups, product shots, or any time where subtle movement is required.

SPECIFICATION
Performance
Load Capacity 20 lb / 9.1 kg
Travel Distance 6″ / 15 cm
Mounting
Camera Mounting Screw 3/8″-16 Male
Tripod Mounting 3/8″-16 Female Thread
Physical
Body Material Aluminum, Stainless Steel
Track Length 9.05″ / 23 cm
Track Width 3.74″ / 9.5 cm
Track Height 0.86″ / 2.2 cm
Weight 1.2 lb / 559 g


Edelkrone Motion Module for Slider One
Make: Edelkrone
Model: Motion Module for Slider One

PRODUCT DESCRIPTION

Motorize your SliderONE with the edelkrone Motion Module for SliderONE. Fitting right to the bottom of your SliderONE, the Motion Module provides precise and hands-free camera movement. Whether you’re adding some motion to a video or constructing a time-lapse, the free SliderONE app provides complete, yet intuitive control over all aspects of the Motion Module. Set A and B points, slide duration, and speed, all within the app. The app can even convert standard sliding motions into stop-motion by calculating the number of frames and the distance required. Power is provided by a separately available LP-E6 battery, which slots in at the base of the Motion Module.

SPECIFICATION

Payload Capacity Up to 20 lb / 9 kg
Mounting Threads 3/8″-16 (1/4″-20 available with included adapter)
Speed 10 µm to 0.98″ / 25 mm per second
Power Supply 1 x LP-E6
Battery Life Active Slide Mode: Up to 20 hours
Timelapse Mode: Up to 96 hours
Idle (Sleep Mode): Up to 2 months

Note: Figures based on fully-charged 1800 mAh Canon LP-E6 battery
Shutter Release 2.5 mm socket
Bluetooth Bluetooth Low-Energy
Dimensions 9.1 x 2.6 x 1.2″ / 23 x 6.5 x 3 cm
Weight 1.3 lb / 590 g
Packaging Info
Box Dimensions (LxWxH) 10.4 x 5.3 x 2.7″

 

Motion Module Overview

Motorize your SliderONE with the edelkrone Motion Module for SliderONE. Fitting right to the bottom of your SliderONE, the Motion Module provides precise and hands-free camera movement. Whether you’re adding some motion to a video or constructing a time-lapse, the free SliderONE app provides complete, yet intuitive control over all aspects of the Motion Module. Set A and B points, slide duration, and speed, all within the app. The app can even convert standard sliding motions into stop-motion by calculating the number of frames and the distance required. Power is provided by a separately available LP-E6 battery, which slots in at the base of the Motion Module.

Quantity Available: 1
24 Hour Rate: $33
Weekend Rate: $55
Weekly Rate: $132

Product Highlights

  • Tracking System for Increased Range
  • 15.7″ Sliding Range When Tripod Mounted
  • 7.9″ Sliding Range on Flat Surfaces
  • 17.6 lb Load Capacity

The SliderPLUS Small from edelkrone is a slider that uses a unique tracking mechanism that allows the rails of the slider to move with the camera when mounted on a tripod. This gives the slider 15.7″ of sliding range in a unit that is only 13.2″ long. Its compact sizes makes it ideal for travel, as it takes of up less room in your camera bag than other sliders with a similar sliding range. The slider supports loads up to 17.6 pounds.

The tracking system works by having two thin bands that are connected to each side of the mounting plate and base plate. When placed on a flat surface, the base plate travels in the opposite direction of the mounting plate. This will yield results of traditional slider. To take advantage of the design, the SliderPLUS needs to be mounted to a tripod. When mounted on a tripod, the movement of the base plate is restricted, causing the rails to move through the base plate in the same direction as the mounting plate.

With traditional sliders, you’re often limited to the amount of dolly in/out you can do, because the slider itself usually will end up in the shot eventually. With the SliderPLUS, the rails are also retracting backwards with the camera, allowing for longer dolly in/out shots. A lock mechanism can be engaged to keep the slider from moving if the tripod becomes unlevel.

The slider provides a 3/8″-16 threaded hole at the bottom of the base plate for attaching to tripods, and comes with interchangeable 1/4″-20 and 3/8″-16 screws for mounting a camera or flat base tripod head to the mounting plate.

  • CNC machined aluminum construction
  • Steel ball bearings
  • 1/4″-20 and 3/8″-16 threaded screws
  • 3/8″-16 threaded mounting hole
  • Adjustable feet for use on ground or flat surfaces
Quantity Available: 1
24 Hour Rate: $44
Weekend Rate: $77
Weekly Rate: $176

FLEXTILT HEAD 2

Ultra Flexible camera positioning solution.
FlexTILT Head 2 is the ultimate pan & tilt solution to frame your shots easily and freely. FlexTILT Head 2 comes with an additional joint that makes it much more versatile.
Adjust with one hand. NO BUTTONS. NO LOCKS. NO KNOBS.
The joints on the FlexTILT Head 2 use edelkrone’s one-of-a-kind constant friction technology. This edelkrone technology can only be produced by super precise CNC machining. FlexTILT Head 2’s joints never get loose even after many adjustments unlike its copycats in the market.
EFFORTLESS HEIGHT ADJUSTMENT
Gives instant height adjustment without dealing with the tripod. Easily pulls out as needed, and adjusts to the exact position you want.
Recommended camera load: 5.5 lb (2.5 kg) or less. Weight: 16 oz (440 g)
  • Extend your camera: FlexTILT Head 2 is an amazing tool to extend your camera beyond obstacles or for birds-eye-view shots.
  • Longer dolly shots:  Increase your dolly in/out range with any slider by 6.7 in (17 cm) when fully extended.
  • Stand Alone: Unlike other camera heads, FlexTILT Head 2 can also work on flat surfaces as a camera stand without the need for legs.
  • Precise and smooth panning: Achieve precise panoramas with pan marking and lens center shifting.
Quantity Available: 1
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66

PRODUCT OVERVIEW:

The edelkrone Pocket Rig 2 is a compact and portable DSLR base that folds out to provide a versatile support arm and 15mm rods. It attaches to the bottom of your DSLR or mirrorless camera via a 1/4″-20 thumbscrew and has a form similar to a battery grip when folded, so it won’t interfere with photo taking and traditional handheld work. It can also be used with compact camcorders. When you need more stability for video recording, simply fold out the Pocket Rig’s fully adjustable support arm that functions as a chest/shoulder brace. By using the belt groove on the support piece, you can also use your belt to support the weight of the rig for stable shots with less arm fatigue.

More than just a support arm, the Pocket Rig 2 also features 15mm rods that can fold out in a matter of seconds, allowing you to attach a follow focus, matte box, handles, or other 15mm rod accessories. The rods can extend up to 7″. At the base of the rig is a 1/4″-20 threaded hole, allowing you to mount it directly onto a tripod or tripod plate and serve as a 15mm rod baseplate for your camera.

  • Compact and portable DSLR rig
  • Attaches to bottom of camera via 1/4″-20 thumbscrew
  • Fold-out, fully adjustable support arm
  • Belt groove to support weight of camera from your belt
  • Fold-out 15mm rods extended up to 7″
  • 1/4″-20 tripod mounting thread
Quantity Available: 1
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66

C-stands are primarily designed to hold grip products, they are an effective way of articulating the item they support using grip heads and arms.  C-Stands have a fast set up and are very multi-purpose.

The Matthews C-Stand Grip Head Kit: consists of a double riser sliding-leg C-Stand, a grip head, and a 40″ arm. The stand rises to a maximum height of 10.5′. The unique staggered leg design of a C-Stand allows it to be nested and placed extremely close to one another on a set. The top leg of the stand is independently adjustable.

  • Independent sliding top leg adjustment for leveling on uneven terrain
  • Grip head and arm allow for mounting and placement of gobos, small reflectors, and small light fixtures

The Avenger Turtle Base C-Stand Grip Arm Kit : features a detachable “turtle” base that can be removed for easier transport. A light head can be mounted to the base directly with the aid of an optional stand adapter. This chrome-plated steel kit includes a 2.5″ grip head and 40″ arm. The innovative design of the C-stand base allows individual legs to be set at any angle, and can be positioned in locations not possible with classic stands. With Spring loaded legs with unique mounts which are easy to fold or replace and Sets up easily in the matter of seconds. With a durable finish it can resist all weather conditions.

Quantity Available: 4
24 Hour Rate: $33
Weekend Rate: $55
Weekly Rate: $132
Quantity Available: 2
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66

2x Manfrotto 051B Mini Compact Light Stand, 2.4m

3x Arri 050MKA, 2.6m

2x Lightpro Light Stand,  2.4m spring loaded 2-stage

Quantity Available: 7
24 Hour Rate: $11
Weekend Rate: $19.80
Weekly Rate: $44

The Kupo Folding Base Mini Stand is a combines the Kupo Backlite Base Stand with the Kupo Folding Mini Stand Pole to give you a variable height adjustment (22.4 – 33.5in) stand that is ideal for lighting backgrounds behind the subject. The base may be used alone with the included 5/8in stud for lighting from the floor.

Kit includes:

  • Backlite Base Stand
  • Folding Mini Pole
  • 5/8in Spiggot
Quantity Available: 1
24 Hour Rate: $11
Weekend Rate: $19.80
Weekly Rate: $44

Kupo Tethermate with a baby receiver, arca-swiss style plate, 1/4-20+3/8 and 2x baby receiver mounting points are designed for horizontal and vertical application. Built for ARCA style mounting sytem. Velcro is equipped through the holes for fastening any objects on the plate securely. Round edge treatment of the plate.

Quantity Available: 1
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66

The Manfrotto 2915 Super Clamp is made of lightweight cast alloy. The Super Clamp is a very versatile tool and it holds just about anything: cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. In turn, the Super Clamp can be securely mounted on any tube from 0.5\\\\\\\\” to 2.1\\\\\\\\”. An attached wedge can be removed and placed in the jaw for flat surfaces. A built-in socket allows the use of over 30 attachments to hold anything from backgrounds to lighting fixtures.

Quantity Available: 7
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22

The Impact Grip Head for Lights and Accessories – 2.5in Diameter (Black) mounts lights, light modifiers, scrims, flags, cutters, and other lighting accessories onto C-stands or butterfly frames.

When trying to get the perfect shot, you often have various lighting accessories such as flags, scrims and cutters set up around your subject. A grip head holds each in a precise position, making it a fairly common piece of equipment on most any set.

Wide compatibility with standard grip equipment; fits 5/8in baby-studs or stand top-studs
Quantity Available: 2
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22

The Manfrotto 143 Magic Arm is designed to hold a light fixture in place, in a variety of situations. It is an elbow arm, with sure locking lever control at the pivot. It will accept any light fixture up to 6.6 lbs that has a baby (5/8in) receptor.

The Magic Arm is modular — Stand it on the floor or a table with an optional Backlite base (3095).
The Magic Arm is modular — Lock it into an optional Super , or Maffer Clamp, on a pipe or shelf from 1/2 – 2 in diameter or thickness.
The Magic Arm is modular — Use it to mount a camera with the optional camera bracket (143BKT)
Quantity Available: 1
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66

Designed for use as an accessory or substitute for a light stand or on its own as a support, the End Jaw, 4inch Super Viser Clamp from Kupo is a highly useful accessory on set or in the field. The clamp has a 4 inch main bolt with a channel (chamfered slot) cut into it to prevent its jaws from rotating when in use. Each clamp jaw is covered in a removable rubber surface that guaranties objects hold fast and aren\’t scratched. Capable of handling items weighing up to 66.1 lb, the clamp has a knurled 5/8in pin at one end and a hex receiver at the other for additional mounting options.

Anti-Twist

A clever groove notched into the back of the clamp keeps the jaws aligned with one another as they open and close.

Rubber Padded Jaws

Mechanical interlocking design instead of glue between the rubber pad and the aluminium die-casting jaws makes the rubber pad firmly attached to allowing secure mounting vertically or horizontally.

5/8in Pin

The threaded shaft terminates in a 5/8in pin for mounting lights or grip accessories.

Hex Receiver

The hex socket is compatible with Convi or Super Clamps for additional mounting options.

Beefy Handle

The ergonomically designed handle provides maximum torque.
Quantity Available: 2
24 Hour Rate: $11
Weekend Rate: $19.80
Weekly Rate: $44

Kupo Baby Ball Head Adapter

Easily mount a standard photo or video head to a light stand with this Baby Ball Head Adapter from Kupo. It features a 1.7 in diameter base with a 3/8-16 screw for compatibility with most tripod heads. There are three set screws available to secure the head to the adapter. Also, it offers both a 5/8in interior receptacle and a 1-1/8in exterior diameter that allows users to mount it to either a baby 5/8in spigot or a junior mount receiver.

Quantity Available: 1
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22

This is a custom overhead rig that we have used for mounting light weight cameras and small lights to 50mm speedrail.

This is a car friendly rig with 2x pieces of 1630cm/5.5ft speedrail that can fit in the boot of most medium sized cars.

The kit includes:

  • 2x 5.5ft pieces of 50mm aluminium speedrail
  • 1x Kupo Tube Joiner (500kg rating)
  • 2x Kupo 16mm Baby Pin Stud Couplers (100kg rating each)
  • 2x C-Stands
  • 4x Shotbags

Due to the use of C-Stands for this rig, the rigging of light weight objects is recommended. Junior stands and couplers are recommended for larger/heavier rigs.

This rig is used at your own discretion and risk and we take no responsibility for any loss or damage caused by its use.

Quantity Available: 1
24 Hour Rate: $77
Weekend Rate: $132
Weekly Rate: $308

Kupo 16mm Stud Coupler

This is used to mount lights and other accessories that use a 16mm baby pin receiver to speedrail and scaffolding.

Quantity Available: 2
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22

Kupo Tube Joiner

Used to join two pieces or scaffold, speedrail or tubing together. Has a 500kg weight capacity.

Quantity Available: 1
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22
Quantity Available: 4
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22
The DJI RS 2 Pro Combo packs several additional accessories with the RS 2 gimbal to provide for a more comprehensive workflow. A key addition is the DJI Ronin RavenEye Image Transmission System, which allows for 330\\\\’ 1080p video transmission from the gimbal with a latency of only 50ms for on Read More
Quantity Available: 1
24 Hour Rate: $154
Weekend Rate: $264
Weekly Rate: $616
The DJI Osmo Mobile 2 carries over most of the features from the original version and offers several key improvements. It\’s a bit lighter. The motion ranges are expanded. And run-time is tripled to approximately 15 hours! Mount any smartphone up to 3.3in wide and capture smooth footage in ha Read More
Quantity Available: 1
24 Hour Rate: $22
Weekend Rate: $38.50
Weekly Rate: $88
The KC-12 Crane from Kessler Crane is a lightweight camera crane system. It features anodized aluminum construction with dual support rails that make the crane twist resistant. An invertible camera platform enables standard or underslung camera capability. With 360° of horizontal rotation and Read More
Quantity Available: 1
24 Hour Rate: $198
Weekend Rate: $330
Weekly Rate: $792
The KC-8 Crane from Kessler Crane is a lightweight camera crane system. It features anodized aluminum construction with dual support rails that make the crane twist resistant. An invertible camera platform enables standard or underslung camera capability. With 360° of horizontal rotation, the Read More
Quantity Available: 1
24 Hour Rate: $154
Weekend Rate: $264
Weekly Rate: $616
Kessler KC Lite 8.0 Jib Make: Kessler Model: Lite 8.0 Jib   PRODUCT HIGHLIGHTS Single Support Rail Design Aluminum Jib Arm Construction 10 lb Load Capacity 5′ Fulcrum to Camera Platform Distance Mounts Onto Your Tripod Release Plate Optional Vertical Brake Available Optional Short Tip Available Read More
Quantity Available: 1
24 Hour Rate: $88
Weekend Rate: $154
Weekly Rate: $352
Description The amazingly advanced and totally re-engineered Glidecam HD-Series™ from Glidecam Industries represents the top of the line in hand-held Camera Stabilization. The lightweight and state-of-the-art Glidecam HD-1000, HD-2000 and HD-4000 hand-held Camera Stabilizers will transform your ha Read More
Quantity Available: 1
24 Hour Rate: $44
Weekend Rate: $77
Weekly Rate: $176
Product Description: The GLIDECAM X-10 is a professional camera stabilization system designed for use with the Glidecam 2000 Pro, 4000 Pro, HD-2000, HD-4000, XR-2000 and XR-4000. The GLIDECAM X-10 system will allow you to walk, run, go up and down stairs, shoot from moving vehicles and travel ov Read More
Quantity Available: 1
24 Hour Rate: $66
Weekend Rate: $110
Weekly Rate: $264
Edelkrone Slider One Make: Edelkrone Model: Slider One PRODUCT DESCRIPTION A small amount of movement can go a long way to bringing a sense of depth to your shots. It is with this thought in mind that edelkrone built the SliderONE, a camera slider that trims excess length to deliver an ultra-compact Read More
Quantity Available: 1
24 Hour Rate: $33
Weekend Rate: $55
Weekly Rate: $132
Product Highlights Tracking System for Increased Range 15.7″ Sliding Range When Tripod Mounted 7.9″ Sliding Range on Flat Surfaces 17.6 lb Load Capacity The SliderPLUS Small from edelkrone is a slider that uses a unique tracking mechanism that allows the rails of the slider to move with Read More
Quantity Available: 1
24 Hour Rate: $44
Weekend Rate: $77
Weekly Rate: $176
FLEXTILT HEAD 2 Ultra Flexible camera positioning solution. FlexTILT Head 2 is the ultimate pan & tilt solution to frame your shots easily and freely. FlexTILT Head 2 comes with an additional joint that makes it much more versatile. Adjust with one hand. NO BUTTONS. NO LOCKS. NO KNOBS. Th Read More
Quantity Available: 1
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66
PRODUCT OVERVIEW: The edelkrone Pocket Rig 2 is a compact and portable DSLR base that folds out to provide a versatile support arm and 15mm rods. It attaches to the bottom of your DSLR or mirrorless camera via a 1/4″-20 thumbscrew and has a form similar to a battery grip when folded, so it won Read More
Quantity Available: 1
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66
C-stands are primarily designed to hold grip products, they are an effective way of articulating the item they support using grip heads and arms.  C-Stands have a fast set up and are very multi-purpose. The Matthews C-Stand Grip Head Kit: consists of a double riser sliding-leg C-Stand, a grip hea Read More
Quantity Available: 4
24 Hour Rate: $33
Weekend Rate: $55
Weekly Rate: $132
Quantity Available: 2
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66
2x Manfrotto 051B Mini Compact Light Stand, 2.4m 3x Arri 050MKA, 2.6m 2x Lightpro Light Stand,  2.4m spring loaded 2-stage
Quantity Available: 7
24 Hour Rate: $11
Weekend Rate: $19.80
Weekly Rate: $44
The Kupo Folding Base Mini Stand is a combines the Kupo Backlite Base Stand with the Kupo Folding Mini Stand Pole to give you a variable height adjustment (22.4 – 33.5in) stand that is ideal for lighting backgrounds behind the subject. The base may be used alone with the included 5/8in stud for l Read More
Quantity Available: 1
24 Hour Rate: $11
Weekend Rate: $19.80
Weekly Rate: $44
Kupo Tethermate with a baby receiver, arca-swiss style plate, 1/4-20+3/8 and 2x baby receiver mounting points are designed for horizontal and vertical application. Built for ARCA style mounting sytem. Velcro is equipped through the holes for fastening any objects on the plate securely. Round edge tr Read More
Quantity Available: 1
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66
The Manfrotto 2915 Super Clamp is made of lightweight cast alloy. The Super Clamp is a very versatile tool and it holds just about anything: cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. In turn, the Super Clamp can be securely mounted on any tube from Read More
Quantity Available: 7
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22
The Impact Grip Head for Lights and Accessories – 2.5in Diameter (Black) mounts lights, light modifiers, scrims, flags, cutters, and other lighting accessories onto C-stands or butterfly frames. When trying to get the perfect shot, you often have various lighting accessories such as flags, sc Read More
Quantity Available: 2
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22
The Manfrotto 143 Magic Arm is designed to hold a light fixture in place, in a variety of situations. It is an elbow arm, with sure locking lever control at the pivot. It will accept any light fixture up to 6.6 lbs that has a baby (5/8in) receptor. The Magic Arm is modular — Stand Read More
Quantity Available: 1
24 Hour Rate: $16.50
Weekend Rate: $27.50
Weekly Rate: $66
Designed for use as an accessory or substitute for a light stand or on its own as a support, the End Jaw, 4inch Super Viser Clamp from Kupo is a highly useful accessory on set or in the field. The clamp has a 4 inch main bolt with a channel (chamfered slot) cut into it to prevent its jaws from Read More
Quantity Available: 2
24 Hour Rate: $11
Weekend Rate: $19.80
Weekly Rate: $44
Kupo Baby Ball Head Adapter Easily mount a standard photo or video head to a light stand with this Baby Ball Head Adapter from Kupo. It features a 1.7 in diameter base with a 3/8-16 screw for compatibility with most tripod heads. There are three set screws available to secure the head to the adap Read More
Quantity Available: 1
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22
This is a custom overhead rig that we have used for mounting light weight cameras and small lights to 50mm speedrail. This is a car friendly rig with 2x pieces of 1630cm/5.5ft speedrail that can fit in the boot of most medium sized cars. The kit includes: 2x 5.5ft pieces of 50mm aluminium speedrail Read More
Quantity Available: 1
24 Hour Rate: $77
Weekend Rate: $132
Weekly Rate: $308
Kupo 16mm Stud Coupler This is used to mount lights and other accessories that use a 16mm baby pin receiver to speedrail and scaffolding.
Quantity Available: 2
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22
Kupo Tube Joiner Used to join two pieces or scaffold, speedrail or tubing together. Has a 500kg weight capacity.
Quantity Available: 1
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22
Quantity Available: 4
24 Hour Rate: $5.50
Weekend Rate: $9.90
Weekly Rate: $22
0
Connecting
Please wait...
Send a message

Sorry, we aren't online at the moment. Leave a message.

Your name
* Email
* Describe your issue
Login now

Need more help? Save time by starting your support request online.

Your name
* Email
* Describe your issue
We're online!
Feedback

Help us help you better! Feel free to leave us any additional feedback.

How do you rate our support?