• For Film, Broadcast and Video Production
• Output: 45,000 Lux at 3.3 w/ Reflector
• 5600K CCT
• AC or Battery Power
• Onboard, Wireless, DMX & App Control
• CRI 96 | TLCI 96 | CQS 95
• Active Cooling
• Bowens S Accessory Mount
• 8 Preset Special Effects
• Includes Remote, Reflector & Bag

• 5500K Daylight Color Temperature
• CRI/TLCI: 96/97
• 18 dB Quiet Fan, Onboard DMX
• Wired Controller Box
• Wireless Remote with 328 foot Range
• V-Mount Battery Plate
• Built-In Handle
• Includes Dedicated Carrying Bag

• 200W Point-Source LED Light
• Beam Angle: 105°, Dims 0-100%
• Color: 5600K, CRI/TLCI: 95/96
• Bluetooth Remote Controllable
• AC Power, Optional Battery
• 8 Built-In Customizable Effects
• Bowens Reflector Mount, Umbrella Holder

Designed with the familiar monolight form factor, intuitive design, and solid core features, the 200d LED Light from Amaran is a 200W light source with 5600K color and a CRI/TLCI rating of 95/96 to indicate advanced accuracy in color rendering. The light is dimmable from 0 to 100%, and while you can make light intensity adjustments locally on the fixture, you can also make them via Bluetooth with your smartphone and a free app. The 200d has eight built-in customisable effects, an umbrella mount, and a Bowens reflector mount for access to Amaran light shapers and also those many other manufacturers that use this popular mount. The 200d is ready for worldwide use via its built-in 100-240V power supply, but it will also run on optional batteries when AC power is unavailable.

Designed with the familiar monolight form factor, intuitive design, and solid core features, the 100d LED Light from Amaran is a 100W light source with 5600K colour and a CRI/TLCI rating of 95/96 to indicate advanced accuracy in color rendering. The light is dimmable from 0 to 100%, and while you can make light intensity adjustments locally on the fixture, you can also make them via Bluetooth with your smartphone and a free app. The 100d has eight built-in customizable effects, an umbrella mount, and a Bowens reflector mount for access to Amaran light shapers and also those many other manufacturers that use this popular mount. The 100d is ready for worldwide use via its built-in 100-240V power supply, but it will also run on optional batteries when AC power is unavailable.

The 100D kit includes the light fixture, hyper reflector, light stand & AC power cable.

Additional Bowen\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s mount modifiers and V-Lock battery adapters are available to hire separately.

Kit Includes:

• 1x Amaran 200D
• 2x Amaran 100D
• 3x Hyper Reflectors
• 3x AC Power Bricks + Cables
• 3x Light Stands
• 3x Shotbags
• 2x Godox 95cm Softboxes

Aputure Amaran 100D

Designed with the familiar monolight form factor, intuitive design, and solid core features, the 100d LED Light from Amaran is a 100W light source with 5600K colour and a CRI/TLCI rating of 95/96 to indicate advanced accuracy in color rendering. The light is dimmable from 0 to 100%, and while you can make light intensity adjustments locally on the fixture, you can also make them via Bluetooth with your smartphone and a free app. The 100d has eight built-in customizable effects, an umbrella mount, and a Bowens reflector mount for access to Amaran light shapers and also those many other manufacturers that use this popular mount. The 100d is ready for worldwide use via its built-in 100-240V power supply, but it will also run on optional batteries when AC power is unavailable.

The 100D kit includes the light fixture, hyper reflector, light stand & AC power cable.

Aputure Amaran 200D

• 200W Point-Source LED Light
• Beam Angle: 105°, Dims 0-100%
• Color: 5600K, CRI/TLCI: 95/96
• Bluetooth Remote Controllable
• AC Power, Optional Battery
• 8 Built-In Customizable Effects
• Bowens Reflector Mount, Umbrella Holder

Designed with the familiar monolight form factor, intuitive design, and solid core features, the 200d LED Light from Amaran is a 200W light source with 5600K color and a CRI/TLCI rating of 95/96 to indicate advanced accuracy in color rendering. The light is dimmable from 0 to 100%, and while you can make light intensity adjustments locally on the fixture, you can also make them via Bluetooth with your smartphone and a free app. The 200d has eight built-in customisable effects, an umbrella mount, and a Bowens reflector mount for access to Amaran light shapers and also those many other manufacturers that use this popular mount. The 200d is ready for worldwide use via its built-in 100-240V power supply, but it will also run on optional batteries when AC power is unavailable.

The 200D kit includes the light fixture, hyper reflector, light stand & AC power cable.

Nanlite Forza 300 LED Monolight

• Forza 60 Daylight with Reflector
• AC Adapter
• Bowens Adapter
• Carrying Bag

• 95% BT 2020 Gamut Coverage
• Full HSI Color Control
• 0 to 100% Dimming
• OLED Display with Control Wheel
• Aputure Sidus Link App Compatibility
• Built-In FX Settings
• Integrated Battery, 120-Minute Runtime
• Wireless Qi Compatible Charging
• USB Type-C PD Quick Charge

The YN600 RGB On-Camera LED Light from Yongnuo features a frameless, ultrathin design. Use it on a DSLR or camcorder, or mount it on a stand. This light features daylight, tungsten, red, green, and blue modes. The intensity of the YN600 RGB On-Camera LED Light can be dimmed without altering the color temperature. This light can be powered via two Sony NP-F series batteries or an AC power supply (not included).

This kit comes inclusive of a regular light stand, 2x Sony NP-F970 batteries, battery charger, flash bracket and remote control.

With a 1.9 inch diameter and a T12 form factor, the PavoTube 30C 4 foot RGBW LED Tube with Internal Battery from NanLite is ideal for hiding unobtrusively in small areas on a set or for shooting in vehicles such as cars, boats, or planes.

Flexibility is key to the PavoTubes design. The light has color temperature thats variable from 2700 to 6500K to blend in seamlessly with ambient light conditions, match other fixtures, or express creative effects. It also has an RGB mode that enables its red, green, and blue LEDs to select from 360 colors with hue control that produces myriad color combinations. Light intensity is variable as well, from 0 to 100%. The PavoTube has a built-in rechargeable battery that will give you 2.2 hours run time on a full charge at 100% power. The light is ready for worldwide use via the included multi-voltage AC adapter and comes with a set of mounting clips and a padded carrying bag.

With a 1.9 inch diameter and a T12 form factor, the PavoTube 30C 4 foot RGBW LED Tube with Internal Battery from NanLite is ideal for hiding unobtrusively in small areas on a set or for shooting in vehicles such as cars, boats, or planes.

Flexibility is key to the PavoTubes design. The light has color temperature thats variable from 2700 to 6500K to blend in seamlessly with ambient light conditions, match other fixtures, or express creative effects. It also has an RGB mode that enables its red, green, and blue LEDs to select from 360 colors with hue control that produces myriad color combinations. Light intensity is variable as well, from 0 to 100%. The PavoTube has a built-in rechargeable battery that will give you 2.2 hours run time on a full charge at 100% power. The light is ready for worldwide use via the included multi-voltage AC adapter and comes with a set of mounting clips and a padded carrying bag.

P120 Comes with Bi-Color Temperature And 360 Degree Full Color. It Features CCT Mode, RGB Color Changing Mode, 4 Scene Lighting Modes, and 8 Emitting Colors Available. The color temperature can be controlled by App from 3000K to 5750K, while on THE light body is 3000K or 5750K.

• Model Number: P120
• Power: 18W
• Voltage: 12V
• Color Temperature: 3000K/5750K(on Light Body), 3000K to 5750K (by App Control)
• Dimension: 1200*36mm
• Weight: 838 g
• Input: DC 12V/1.5A
• Luminous Flux: 1350lm(MAX)
• CCT: 3000K-5750K(by App Control)
• CRI: Ra>95 Size: 1200*36mm
• Battery Capacity: Li-ion 7.3V / 10400mAh
• Charging Time: ~6hours (Used by 18W quick charging adapter)
• IP Rating: IP68 Waterproof
• Function: APP Control

High Capacity Battery

With High Battery Capability 10400mAh, It Can Continuously Work 4.5 Hours at the Brightest White Mode. It can be powered by a built-in battery and a DC power adapter.

Accurate Color Rendition

with the Powerful SMD LED light beads, CRI≥95 insure Natural, Pristine Color for Broadcast Video, Photography, Television Production and Studio Filmmaking.

What is In the Box

• 1* P120 RGB Light Stick
• 1* Remote Controller
• 1* USB Cable
• 1* User manual
• 1* Pergear Cloth

Kit contains 3x Luxceo p120

P120 Comes with Bi-Color Temperature And 360 Degree Full Color. It Features CCT Mode, RGB Color Changing Mode, 4 Scene Lighting Modes, and 8 Emitting Colors Available. The color temperature can be controlled by App from 3000K to 5750K, while on THE light body is 3000K or 5750K.

• Model Number: P120
• Power: 18W
• Voltage: 12V
• Color Temperature: 3000K/5750K(on Light Body), 3000K to 5750K (by App Control)
• Dimension: 1200*36mm
• Weight: 838 g
• Input: DC 12V/1.5A
• Luminous Flux: 1350lm(MAX)
• CCT: 3000K-5750K(by App Control)
• CRI: Ra>95 Size: 1200*36mm
• Battery Capacity: Li-ion 7.3V / 10400mAh
• Charging Time: ~6hours (Used by 18W quick charging adapter)
• IP Rating: IP68 Waterproof
• Function: APP Control

High Capacity Battery

With High Battery Capability 10400mAh, It Can Continuously Work 4.5 Hours at the Brightest White Mode. It can be powered by a built-in battery and a DC power adapter.

Accurate Color Rendition

with the Powerful SMD LED light beads, CRI≥95 insure Natural, Pristine Color for Broadcast Video, Photography, Television Production and Studio Filmmaking.

What is In the Box

• 1* P120 RGB Light Stick
• 1* Remote Controller
• 1* USB Cable
• 1* User manual
• 1* Pergear Cloth

LUXCEO P7RGB LED Video Light Wand with APP Control Full Color Handheld Photography Light 12 Lighting Mode,CRI≥95 IP68 Waterproof with10400mAH Rechargeable Battery 3000K 5750K Colorful Stick.

Built-in intelligent identification chip, suitable for most mobile phones, flat Board and other USB digital devices.

APP is universal for Apple system and Android system.

Multi-light Control——The APP can connect multiple LED photography light and control them at the same time. Each light wand can be controlled individually,if you want to control multiple LED light sticks at the same time, you can group these lights into one group by APP.

Kit contains 4x Luxceo P7RGB

LUXCEO P7RGB LED Video Light Wand with APP Control Full Color Handheld Photography Light 12 Lighting Mode,CRI≥95 IP68 Waterproof with10400mAH Rechargeable Battery 3000K 5750K Colorful Stick.

Built-in intelligent identification chip, suitable for most mobile phones, flat Board and other USB digital devices.

APP is universal for Apple system and Android system.

Multi-light Control——The APP can connect multiple LED photography light and control them at the same time. Each light wand can be controlled individually,if you want to control multiple LED light sticks at the same time, you can group these lights into one group by APP.

Luxceo P7

Includes:

• Light Tube
• Remote Control
• 2x Magnetic Mounts

LUXCEO P7 Bi-color Outdoor Rechargeable IP68 Waterproof LED Underwater Video Light for Film Shooting

1. The product is waterproof IP68 and can be used for underwater photography.
2. Stepless dimming, dual-color temperature. The brightest level is up to 800 lumen.
3. Power bank function. Max output is 5V 2.4A.
4. The product has an intelligent identification chip. It can charge most mobile phones, Ipad, etc.
5. Built-in 18650 battery with high-capacity 10,400mAh. The brightest level can work up to 4.5 hours.
6. With 1/4-20 standard screw. It can be used with tripods.
7. Suitable for emergency, photography, and other uses.
8. The product has two lanyard holes. It can be hung anywhere you want.

LightPro 4 Bank Fluorescent Light with True Match 95CRI Kinoflow Flurescent Tubes.

These four tubes will give you an equivalent of 880 watts of bright, colour consistent, flicker free light. They are capable of over 8,000 hours of operation, making them an economical choice. Diffuser, barndoors, and mounting bracket included.

SPECS
Two Bank control ON/OFF switches on the body
Integrated four leaf mirrored barndoors for directional light control
Flicker-free
High CRI – 95

Arri 650 plus
Make: Arri
Model: Arrilite 650 Plus

PRODUCT DESCRIPTION
The Arrilite 650W Plus fresnel uses the same lens, reflector, housing and power cord as the Arilite 300W fresnel. The beam angle in the flood position is 52 degrees, and a narrow 14.5 degrees when spotted. The unit also features a large 4.3″ (110 mm) low expansion, borosillicate fresnel lens, spherical, specular, high purity reflector, and a ribbed housing for cooler operation.

SPECIFICATION
• Rating: 650 Watts
• Socket (Lampholder): GY9.5
• Lens (Condenser): 4.3″ (110mm) low expansion, borosillicate fresnel lens
• Reflector (Mirror): Spherical, specular, high purity reflector
• Mounting: 5/8″ (16mm) stand mount
• Yoke: Flat blade
• Cable: 25′ (7.6m) cable with inline switch
• Focusing: Worm gear driven
• Weight: 8 lbs (3.6kg)
• Dimensions: 9″ x 12″ x 7.5″ (22.9 x 30.5 x 19 cm)

This kit includes:

• 3x Arrilite 650/650+ Tungsten Fresnel Lamps
• 3x Arri 050 Standard Light Stands
• Arri 3 Lamp Bag
• Scrim Set

Arri 650 plus
Make: Arri
Model: Arrilite 650 Plus

PRODUCT DESCRIPTION
The Arrilite 650W Plus fresnel uses the same lens, reflector, housing and power cord as the Arilite 300W fresnel. The beam angle in the flood position is 52 degrees, and a narrow 14.5 degrees when spotted. The unit also features a large 4.3″ (110 mm) low expansion, borosillicate fresnel lens, spherical, specular, high purity reflector, and a ribbed housing for cooler operation.

SPECIFICATION
• Rating: 650 Watts
• Socket (Lampholder): GY9.5
• Lens (Condenser): 4.3″ (110mm) low expansion, borosillicate fresnel lens
• Reflector (Mirror): Spherical, specular, high purity reflector
• Mounting: 5/8″ (16mm) stand mount
• Yoke: Flat blade
• Cable: 25′ (7.6m) cable with inline switch
• Focusing: Worm gear driven
• Weight: 8 lbs (3.6kg)
• Dimensions: 9″ x 12″ x 7.5″ (22.9 x 30.5 x 19 cm)

Arrilight 800
Make: Arri
Model: Arrilite 800

PRODUCT DESCRIPTION
A lightweight revolution in quartz lighting, the 800w Redhead is constructed from a polyester/fibre glass material which provides the benefit of light weight. With almost total heat insulation, adjustment can be made whilst the lamp is in operation without fear of burning the hands. There is no need to wait for the housing to cool down before packing it away at the end of a session, little fear of damage to ceilings or curtains in restricted locations and no paint to burn off there by spoiling the appearance. It has an exceptionally easy to use focusing mechanism that can vary the beam angle from 42 degrees to 86 degrees with even distribution of light.

SPECIFICATION
• Power: 800W
• Colour Temperature: 3200K
• Lamp Type: P2/13 DXX 800 W 230V R7s
• Barn Door Size: 184mm
• Filter Insertion Size: 184mm
• Dimensions: 290mm x 250mm x 252mm
• Weight: 3.6kg

This kit includes:

• 3x Arrilite 800 Tungsten Lamps
• 3x Arri 050 Standard Light Stands
• Arri 3 Lamp Bag
• Scrim Set

Arrilite 800
Make: Arri
Model: Arrilite 800

PRODUCT DESCRIPTION
A lightweight revolution in quartz lighting, the 800w Redhead is constructed from a polyester/fibre glass material which provides the benefit of light weight. With almost total heat insulation, adjustment can be made whilst the lamp is in operation without fear of burning the hands. There is no need to wait for the housing to cool down before packing it away at the end of a session, little fear of damage to ceilings or curtains in restricted locations and no paint to burn off there by spoiling the appearance. It has an exceptionally easy to use focusing mechanism that can vary the beam angle from 42 degrees to 86 degrees with even distribution of light.

SPECIFICATION
• Power: 800W
• Colour Temperature: 3200K
• Lamp Type: P2/13 DXX 800 W 230V R7s
• Barn Door Size: 184mm
• Filter Insertion Size: 184mm
• Dimensions: 290mm x 250mm x 252mm
• Weight: 3.6kg

ARRILITE 2000

The ARRILITE series comprises fully focusing, open face tungsten floodlights that are ideal for electronic news gathering, field production and fast turnaround location use. Specially designed reflectors balance controllability and efficiency while providing an exceptionally even field of illumination. The high light output is ideal for bouncing or diffusing and provides wide area coverage. A double skin, thermoplastic housing with aluminium inner shell gives superior hot-handling capacity and also keeps the weight down.

Includes:

Custom Hard Case
Arrilite 2000 Watt Head
Barn Door Set
Spare Bulb With Case

Features:

• Very high light output
• Hot-handling capacity
• Fully focusing
• Lightweight
• Even field of illumination
• Barndoors with spring clips for filter use
• Fully rotatable accessory holder
• Wide range of accessories

SPECS
Type of Lamphead: Par
Power: 2000 W
Lamp Type: P2/27 FEX 2000 W 230V RX7s
Supply Voltage: 230 V
Correlated Color Temperature: 3200 K
Lamp Base: RX7s
Lens Diameter: – mm
Barn Door Size: 254 mm
Filter Insertion Size: 254 mm
Mounting: Spigot 16mm
Packed Size: 380 mm – 345 mm – 325 mm
Packed Volume: 42610 ccm
Shipping Weight: 5.7 kg
Protection Class: IP 20
Compliance: CE

The perfect tungsten source for hair lights and sharp focused beams.

The Dedo 4 light kit includes:

• 4x Dedolight DLH4 24v
• 4x Standard Light Stands
• Ballast Box
• 4x XLR cables
• 1x Jug Plug
• Hard Case

Silver Par 56 Pro Can with Par Safe Lamp Base, Square Colour Frame & 16mm baby receiver.

This kit includes:

2 x 640 watt heads; with

1x Cyber Commander Remote trigger

2x Receivers

1x 64 inch (1400mm) soft silver or white PLM Umbrella

1x 51 inch (1140mm) white PLM Umbrella

2x front diffusers to make the umbrella a softbox

Einstein™ Flash Unit
PART NUMBER – E640
OVERVIEW
The Einstein™ Flash Unit features action stopping flash durations, color consistency, and the broadest power range. The flexibility of the power range allows for everything from over-powering the sun, to shooting indoor portraits with a wide-open aperture.

Perfect for: Professional photographers in any field.

FEATURES

9 f-stop power variability (2.5 Ws to 640 Ws)
Adjustable in precise 1/10 f-stops
All-digital control from LCD display
Global plug-and-play from 95 to 265 VAC
Action stopping flash durations as short as 1/13,500 sec. (t.1)
Color consistency +/- 50K at any power
Bright, adjustable 250 W modeling lamp
Frosted dome cover reduces UV emission
Audible and visual recycle indicators
PRODUCT SPECS
Einstein™ Flash Unit
Watt seconds 640 Ws
Power Variability 9 f-stops (full to 1/256 power)
Recycle to Full 1.7 sec.
Flash Duration (t.5) 1/2000 sec. (at full power)
Flash Duration (t.1) – in Action Mode 1/588 sec. (at full power) | 1/13,500 sec. (at 1/256 power)
Flash Duration (t.1) – in Color Mode 1/588 sec. (at full power) | 1/8,000 sec. (at 1/256 power)
Power Requirements Automatic power switching from 95 to 265 VAC, 50/60 Hz (no lamp change or user attention required)
Average Current Draw Brief initial recycle surge current of 8.5A; average draw of 8A
Sync / Trigger Voltage Less than 5 volts (safe for use with DSLR cameras)
Modeling Lamp 250 W, 120VAC bayonet-style quartz bulb
Flashtube 12mm flashtube (daylight-balanced and UV-coated
LCD Display Back-lit, high-resolution color LCD. 320×240 pixels; 2.4 in.
Stand Mount Fits stands up to 5/8 in.
Umbrella Mount Accepts umbrella rods up to 9mm
Weight 4 lbs. 5 oz.
Dimensions 7 in. (height) x 5.4 in. (diameter) x 7.8 in. (length)
Dimensions Note: length measurements taken from the front of the shipping cover (in place on the unit’s faceplate) to the back panel; height measurements taken from the top of the umbrella screw to the bottom of the light stand top coupler, folded back underneath the unit; width measurements taken from side to side at the widest points

Compatible with all BUFF light modifiers, light stands, CyberSync™ remotes, and Vagabond™ systems

Cyber Commander™
1440

PART NUMBER – CC
OVERVIEW
The Cyber Commander™ allows for wireless triggering of flash units. Additional features include:, adjusting the outputs of both the flashbulb and modeling light directly from the camera position, grouping certain lights in a setup together, as well as naming the individual lights in the setup. Last, but certainly not least, the Cyber Commander™ even has a built in light meter!
FEATURES
Use on the camera hotshoe or handheld when the CyberSync™ trigger transmitter (CST2) is attached to the camera
Up to 400′ of wireless working range via radio frequency (2.4 GHz band)
16 frequencies to choose from
16 available channels, providing complete control of up to 16 different flash units
8 slots available for grouping of different flash units in a setup
Adjusts both flash power and modeling lights in 1/10 f-stop increments
Built-in light meter measures individual lights, groups, or all lights together
Stores and retrieves over 50 complex lighting setups
Compatible with the CyberSync™ Plus Model Receivers (CSR+ or CSRB+) when used with AlienBees™ or White Lighting™ flash units
Compatible with the CyberSync™ Transceiver (CSXCV) when used with DigiBees™ or Einstein™ flash units

TECHNICAL SPECS
Cyber Commander™
Dimensions 2 in. (width) x 4.75 in. (height – including antenna) x 0.75 in.(depth)
LCD Screen Dimensions 1.5 in. (width) x 2 in. (height)
System Frequency Range 16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
System Encoding Secure 256-bit binary encoded packet, with validity verification
System Latency 1/4000 typical delay from closing of camera contact to receiver sync output signal
Battery Life 6.5 to 8.5 hours under normal use with premium alkaline batteries (uses two AAA alkaline or lithium batteries)
Sync Voltage Less than 4 Vdc

CyberSync™ Transceiver
1467

PART NUMBER – CSXCV
OVERVIEW
The CyberSync™ Transceiver is designed for use with Einstein™ flash units. The transceiver fits into the receptacle located on each flash unit. This forms an all-digital interface between the flash unit and the Cyber Commander™. The Transceiver is powered by the flash unit that it is connected to with the frequency and channel selection being made on the back panel of the flash unit.
FEATURES
All-digital Transceiver
Compatible with Einstein™ flash units ONLY
Can be used with the CyberSync™ Trigger Transmitter (CST2) for wireless firing
Full adjustment and wireless firing when used with the Cyber Commander™
NOT compatible with AlienBees™ or White Lightning™ flash units
DIMENSIONS / TECHNICAL SPECS
CyberSync™ Transceiver
Dimensions 1 in. (width) x 2.75 in. (height) x 0.375 in.(depth)
System Frequency Range 16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
System Encoding Secure 256-bit binary encoded packet, with validity verification
System Latency 1/4000 typical delay from closing of camera contact to receiver sync output signal
Sync Voltage Up to 300 Vdc from a connected flash unit

64” White PLM™ Umbrella
1009

PART NUMBER – PLM64U-W-8MM
OVERVIEW
The White PLM™ umbrella can be used as a shoot-through, diffused light source or a soft, bounced light source. It provides a wide, unfocused spread of light covering a 150° area for close, low specularity lighting with large round catchlights and very soft shadows.

FEATURES
White fabric for shoot-through or bounce use
Provides unfocused lighting over a 150° area
Provides soft shadows with perfect round catchlights
Easy to use pop open umbrella style with 8mm rod
Less than +/- 150K color temperature shift
Meticulously designed arc shape for even light
Compatible with all Paul C. Buff™ flash units or any flash unit that has an umbrella adapter that will support an 8mm umbrella rod.
ARRIVES WITH
(1) translucent white assembled umbrella with 8mm umbrella shaft
(1) Black nylon umbrella sleeve
PRODUCT SPECS
PLM64U-W-8MM
Arc Measurement 64 in. (across the arc from tip to tip)
Diameter 54 in. (across the open face)
Collapsed 33.5 in. (closed umbrella from top to bottom)

64” Soft Silver PLM™ Umbrella
1021
PART NUMBER – PLM64U-SS-8MM
OVERVIEW
The Soft Silver PLM™ umbrella is perfect for everyday use with various subjects as it bounces the light from the flash unit, retaining high efficiency with a wide angle of coverage. The soft silver fabric produces a controlled, feathered falloff with very soft shadows, perfectly round catchlights and an added specular punch over the white PLM™ umbrellas.

FEATURES
Soft silver bounce interior with black exterior
Highly efficient output (4 times the output of a softbox)
Controlled coverage with a feathered fall-off
Provides soft feathered shadows with perfect round catchlights
Easy to use pop open umbrella style with 8mm rod
Less than +/- 150K color temperature shift
Meticulously designed arc shape for even light
Compatible with all Paul C. Buff™ flash units or any flash unit that has an umbrella adapter that will support an 8mm umbrella rod.
ARRIVES WITH
(1) Soft silver assembled umbrella with 8mm umbrella shaft
(1) Black nylon umbrella sleeve
PRODUCT SPECS
PLM64U-SS-8MM
Arc Measurement 64 in. (across the arc from tip to tip)
Diameter 54 in. (across the open face)
Collapsed 33.5 in. (closed umbrella from top to bottom)
OUTPUT SPECS
64″ Soft Silver PLM™ on an Einstein™ Flash Unit
Output at 14′ f16 (ISO 100)
Coverage 12′
Color Temperature 5600K (0K Color Shift) Tint 1M
64″ Soft Silver PLM™ w/ White Front Diffusion Fabric on an Einstein™ Flash Unit
Output at 14′ f8 +4/10 (ISO 100)
Coverage 160°
Color Temperature 5450K (-150K Color Shift) Tint 1M

51” White PLM™ Umbrella
1030
PART NUMBER – PLM51U-W-8MM
OVERVIEW
The White PLM™ umbrella can be used as a shoot-through, diffused light source or a soft, bounced light source. It provides a wide, unfocused spread of light covering a 150° area for close, low specularity lighting with large round catchlights and very soft shadows.

FEATURES
White fabric for shoot-through or bounce use
Provides unfocused lighting over a 150° area
Provides soft shadows with perfect round catchlights
Easy to use pop open umbrella style with 8mm rod
Less than +/- 150K color temperature shift
Meticulously designed arc shape for even light
Compatible with all Paul C. Buff™ flash units or any flash unit that has an umbrella adapter that will support an 8mm umbrella rod.
ARRIVES WITH
(1) translucent white assembled umbrella with 8mm umbrella shaft
(1) Black nylon umbrella sleeve
PRODUCT SPECS
PLM51U-W-8MM
Arc Measurement 51 in. (across the arc from tip to tip)
Diameter 43.75 in. (across the open face)
Collapsed 27 in. (closed umbrella from top to bottom)

Link to video for how to use the Cybercommander can be found HERE ( https://youtu.be/Zw9LoKstVsg )

NOTE: All the above information is courtesy of the www.paulcbuff.com website. Gold Coast Camera Hire is not responsible for any differences in information above and the actual rented product. Gold Coast Camera Hire has taken all reasonable steps to ensure the accuracy of the information provided.

This kit has the options of:

4 x 640 watt heads; with

2x Flash Triggers

4x Flash Receivers

2x 64 inch (1400mm) soft silver or white PLM Umbrella

2x 51 inch (1140mm) white PLM Umbrella

4x – front diffusers to make the umbrella a softbox

Einstein™ Flash Unit
PART NUMBER – E640
OVERVIEW
The Einstein™ Flash Unit features action stopping flash durations, color consistency, and the broadest power range. The flexibility of the power range allows for everything from over-powering the sun, to shooting indoor portraits with a wide-open aperture.

Perfect for: Professional photographers in any field.

FEATURES

9 f-stop power variability (2.5 Ws to 640 Ws)
Adjustable in precise 1/10 f-stops
All-digital control from LCD display
Global plug-and-play from 95 to 265 VAC
Action stopping flash durations as short as 1/13,500 sec. (t.1)
Color consistency +/- 50K at any power
Bright, adjustable 250 W modeling lamp
Frosted dome cover reduces UV emission
Audible and visual recycle indicators
PRODUCT SPECS
Einstein™ Flash Unit
Watt seconds 640 Ws
Power Variability 9 f-stops (full to 1/256 power)
Recycle to Full 1.7 sec.
Flash Duration (t.5) 1/2000 sec. (at full power)
Flash Duration (t.1) – in Action Mode 1/588 sec. (at full power) | 1/13,500 sec. (at 1/256 power)
Flash Duration (t.1) – in Color Mode 1/588 sec. (at full power) | 1/8,000 sec. (at 1/256 power)
Power Requirements Automatic power switching from 95 to 265 VAC, 50/60 Hz (no lamp change or user attention required)
Average Current Draw Brief initial recycle surge current of 8.5A; average draw of 8A
Sync / Trigger Voltage Less than 5 volts (safe for use with DSLR cameras)
Modeling Lamp 250 W, 120VAC bayonet-style quartz bulb
Flashtube 12mm flashtube (daylight-balanced and UV-coated
LCD Display Back-lit, high-resolution color LCD. 320×240 pixels; 2.4 in.
Stand Mount Fits stands up to 5/8 in.
Umbrella Mount Accepts umbrella rods up to 9mm
Weight 4 lbs. 5 oz.
Dimensions 7 in. (height) x 5.4 in. (diameter) x 7.8 in. (length)
Dimensions Note: length measurements taken from the front of the shipping cover (in place on the unit’s faceplate) to the back panel; height measurements taken from the top of the umbrella screw to the bottom of the light stand top coupler, folded back underneath the unit; width measurements taken from side to side at the widest points

Compatible with all BUFF light modifiers, light stands, CyberSync™ remotes, and Vagabond™ systems

Cyber Commander™
1440

PART NUMBER – CC
OVERVIEW
The Cyber Commander™ allows for wireless triggering of flash units. Additional features include:, adjusting the outputs of both the flashbulb and modeling light directly from the camera position, grouping certain lights in a setup together, as well as naming the individual lights in the setup. Last, but certainly not least, the Cyber Commander™ even has a built in light meter!
FEATURES
Use on the camera hotshoe or handheld when the CyberSync™ trigger transmitter (CST2) is attached to the camera
Up to 400′ of wireless working range via radio frequency (2.4 GHz band)
16 frequencies to choose from
16 available channels, providing complete control of up to 16 different flash units
8 slots available for grouping of different flash units in a setup
Adjusts both flash power and modeling lights in 1/10 f-stop increments
Built-in light meter measures individual lights, groups, or all lights together
Stores and retrieves over 50 complex lighting setups
Compatible with the CyberSync™ Plus Model Receivers (CSR+ or CSRB+) when used with AlienBees™ or White Lighting™ flash units
Compatible with the CyberSync™ Transceiver (CSXCV) when used with DigiBees™ or Einstein™ flash units

TECHNICAL SPECS
Cyber Commander™
Dimensions 2 in. (width) x 4.75 in. (height – including antenna) x 0.75 in.(depth)
LCD Screen Dimensions 1.5 in. (width) x 2 in. (height)
System Frequency Range 16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
System Encoding Secure 256-bit binary encoded packet, with validity verification
System Latency 1/4000 typical delay from closing of camera contact to receiver sync output signal
Battery Life 6.5 to 8.5 hours under normal use with premium alkaline batteries (uses two AAA alkaline or lithium batteries)
Sync Voltage Less than 4 Vdc

CyberSync™ Transceiver
1467

PART NUMBER – CSXCV
OVERVIEW
The CyberSync™ Transceiver is designed for use with Einstein™ flash units. The transceiver fits into the receptacle located on each flash unit. This forms an all-digital interface between the flash unit and the Cyber Commander™. The Transceiver is powered by the flash unit that it is connected to with the frequency and channel selection being made on the back panel of the flash unit.
FEATURES
All-digital Transceiver
Compatible with Einstein™ flash units ONLY
Can be used with the CyberSync™ Trigger Transmitter (CST2) for wireless firing
Full adjustment and wireless firing when used with the Cyber Commander™
NOT compatible with AlienBees™ or White Lightning™ flash units
DIMENSIONS / TECHNICAL SPECS
CyberSync™ Transceiver
Dimensions 1 in. (width) x 2.75 in. (height) x 0.375 in.(depth)
System Frequency Range 16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
System Encoding Secure 256-bit binary encoded packet, with validity verification
System Latency 1/4000 typical delay from closing of camera contact to receiver sync output signal
Sync Voltage Up to 300 Vdc from a connected flash unit

64” White PLM™ Umbrella
1009

PART NUMBER – PLM64U-W-8MM
OVERVIEW
The White PLM™ umbrella can be used as a shoot-through, diffused light source or a soft, bounced light source. It provides a wide, unfocused spread of light covering a 150° area for close, low specularity lighting with large round catchlights and very soft shadows.

FEATURES
White fabric for shoot-through or bounce use
Provides unfocused lighting over a 150° area
Provides soft shadows with perfect round catchlights
Easy to use pop open umbrella style with 8mm rod
Less than +/- 150K color temperature shift
Meticulously designed arc shape for even light
Compatible with all Paul C. Buff™ flash units or any flash unit that has an umbrella adapter that will support an 8mm umbrella rod.
ARRIVES WITH
(1) translucent white assembled umbrella with 8mm umbrella shaft
(1) Black nylon umbrella sleeve
PRODUCT SPECS
PLM64U-W-8MM
Arc Measurement 64 in. (across the arc from tip to tip)
Diameter 54 in. (across the open face)
Collapsed 33.5 in. (closed umbrella from top to bottom)

64” Soft Silver PLM™ Umbrella
1021
PART NUMBER – PLM64U-SS-8MM
OVERVIEW
The Soft Silver PLM™ umbrella is perfect for everyday use with various subjects as it bounces the light from the flash unit, retaining high efficiency with a wide angle of coverage. The soft silver fabric produces a controlled, feathered falloff with very soft shadows, perfectly round catchlights and an added specular punch over the white PLM™ umbrellas.

FEATURES
Soft silver bounce interior with black exterior
Highly efficient output (4 times the output of a softbox)
Controlled coverage with a feathered fall-off
Provides soft feathered shadows with perfect round catchlights
Easy to use pop open umbrella style with 8mm rod
Less than +/- 150K color temperature shift
Meticulously designed arc shape for even light
Compatible with all Paul C. Buff™ flash units or any flash unit that has an umbrella adapter that will support an 8mm umbrella rod.
ARRIVES WITH
(1) Soft silver assembled umbrella with 8mm umbrella shaft
(1) Black nylon umbrella sleeve
PRODUCT SPECS
PLM64U-SS-8MM
Arc Measurement 64 in. (across the arc from tip to tip)
Diameter 54 in. (across the open face)
Collapsed 33.5 in. (closed umbrella from top to bottom)
OUTPUT SPECS
64″ Soft Silver PLM™ on an Einstein™ Flash Unit
Output at 14′ f16 (ISO 100)
Coverage 12′
Color Temperature 5600K (0K Color Shift) Tint 1M
64″ Soft Silver PLM™ w/ White Front Diffusion Fabric on an Einstein™ Flash Unit
Output at 14′ f8 +4/10 (ISO 100)
Coverage 160°
Color Temperature 5450K (-150K Color Shift) Tint 1M

51” White PLM™ Umbrella
1030
PART NUMBER – PLM51U-W-8MM
OVERVIEW
The White PLM™ umbrella can be used as a shoot-through, diffused light source or a soft, bounced light source. It provides a wide, unfocused spread of light covering a 150° area for close, low specularity lighting with large round catchlights and very soft shadows.

FEATURES
White fabric for shoot-through or bounce use
Provides unfocused lighting over a 150° area
Provides soft shadows with perfect round catchlights
Easy to use pop open umbrella style with 8mm rod
Less than +/- 150K color temperature shift
Meticulously designed arc shape for even light
Compatible with all Paul C. Buff™ flash units or any flash unit that has an umbrella adapter that will support an 8mm umbrella rod.
ARRIVES WITH
(1) translucent white assembled umbrella with 8mm umbrella shaft
(1) Black nylon umbrella sleeve
PRODUCT SPECS
PLM51U-W-8MM
Arc Measurement 51 in. (across the arc from tip to tip)
Diameter 43.75 in. (across the open face)
Collapsed 27 in. (closed umbrella from top to bottom)

Link to video for how to use the Cybercommander can be found HERE ( https://youtu.be/Zw9LoKstVsg )

NOTE: All the above information is courtesy of the www.paulcbuff.com website. Gold Coast Camera Hire is not responsible for any differences in information above and the actual rented product. Gold Coast Camera Hire has taken all reasonable steps to ensure the accuracy of the information provided.

PRODUCT OVERVIEW
The Canon Remote Flash Control Transmitter ST-E3-RT provides full support of Canon’s new radio-based wireless flash technology and can control up to five groups of flashes, up to 100 feet (30m) away

The ST-E3-RT makes complex lighting setups simple by facilitating radio-controlled, two-way wireless transmission up to 30m away, among up to five groups or fifteen individual Speedlites. It has controls similar to the new Speedlite 600EX-RT, including multiple flash metering options, and a variety of flash modes. Compact design with highly reliable construction combined with a clearly laid-out information panel and buttons with back lighting make this an indispensible tool for advanced professional flash photography. The ST-E3-RT represents the next generation in wireless flash systems. Newly-designed wireless system uses 2-way radio wave communication for enhanced communication among master and slave units. Achieves a transmission angle of 360 degrees.

Key Features
– Facilitates Wireless Transmission
– 5 Groups or 15 Individual Speedlites
– Range Up to 30m
– Makes Complex Lighting Setups Simple
– Compact Design & Reliable Construction
– Clear Dot matrix LCD Information Panel
– Buttons With Back Lighting
– 8 types of custom functions, 3 types of personal functions
– Supports E-TTL II flash, manual flash, stroboscopic and auto external flash metering
– Improved hot shoe contacts for reliable information transmission and operation

Slave operation confirmation information
– Green Light on: Radio Transmissions Okay
– Red Light on: Not Connected
– Blinking: Transmission Error/ Too many units (Master units + slave units = more than 16 units)
– Orange Light on: Sub-master transmission
– Blinking: Receiving remote release shooting, linked shooting signal

Please Note: Because it does not have an optical transmission function, the Speedlite Transmitter ST-E3-RT is not compatible with earlier Speedlite models such as 580EX II.

Specifications
Type: Radio transmissions wireless Speedlite transmitter
Transmission Range Approx: 30m
Flash Control: Ratio control: 1:8 – 1:1 – 8:1, power 1/2-stop increments
Coverage: Flash coverage: Transmission Angle: 360° all around
Power Source: 2x AA/LRG Alkaline Batteries (Ni-MH and Lithium batteries can also be used)
Battery Life: Approx. 10 hours continuously when using AA/LR6 alkaline batteries (At a room temperature of 73°F/+23°C).
Dimensions: 67.4 x 61.5 x 77.4 mm
Weight: 110 g excluding battery

Overview
Further development of Canon’s flagship Speedlite has led to the production of the 580 EX II. This is the premier Speedlite for all photographers, including professionals. Newly designed to match with the EOS-1D Mark III in terms of improved dust- and water-resistance, body strength, and the ability to control flash functions and settings from the camera menu (EOS-1D Mark III only). Other features include improved communication reliability through its direct contacts, and recycling time is both 20% shorter than the 580EX and is completely inaudible.

Approx. 20% faster recycling time compared to 580EX
Superior build quality, including a metal foot for higher rigidity
Max. Guide No. 58 at 105mm setting (GN 190, feet)
Auto conversion of flash coverage with compatible digital SLR cameras
White Balance info communicated instantly to compatible digital SLR cameras
Full swivel, 180° in either direction
AF-assist beam, compatible with all AiAF points on every EOS SLR
Dust- and water- resistance to match the EOS-1D Mark IV
Compatible Cameras – E-TTL operation with all EOS digital SLRs; PowerShot G2, G3, G5, G6, and Pro1; and the following EOS film cameras – EOS-1v, EOS-3, Elan 7N series, Elan 7 series, Elan II series, Rebel T2, Ti, K2, GII, G. TTL operation with all other 35mm EOS SLRs, and Canon T90.
Guide Number – 190 (at ISO 100, feet) / 58 (meters); flash head at 105mm zoom setting
Number of Flashes – Approx. 100 to 700, with fresh AA-size alkaline batteries
Recycling Time – Approx. 0.1 to 6 seconds, with fresh AA-size alkaline batteries
Flash Range – (At ISO 100, with 50mm f/1.4 lens at f/1.4) – Approx. 1.6 to 98.4 feet / 0.5 to 30m
AF Assist Beam – Built-in; covers all focus points in EOS cameras with 1, 3, 5, 7, 9, or 45 AF points; Distance range – 2 to 32.8 feet (0.6 to 10m) at center; 2 to 16.4 feet (0.6 to 5m) at periphery
Custom Functions – Fourteen Speedlite Custom Functions built-in; set on Speedlite’s LCD panel

Power Source – Four AA-size batteries – alkaline, lithium, or rechargeable Ni-MH usable
Weight – 13.2 oz./375g, without batteries (4 AA alkaline batteries add 3.5 oz./100g)
Circular aperture
A circular aperture delivers smooth, even-looking bokeh (background blur) – ideal for isolating subjects at large aperture, or compelling portraiture.

NOTE: All the above information is courtesy of the www.canon.com and www.canon.com.au website. Gold Coast Camera Hire is not responsible for any differences in information above and the actual rented product. Gold Coast Camera Hire has taken all reasonable steps to ensure the accuracy of the information provided.

Description

Yongnuo YN-E3-RX is the world first E-TTL wireless flash receiver for Canon’s new RT flash system. It makes E-TTL flashes compatible with RT master flashes like 600EX-RT and commanders as ST-E3-RT and YN-E3-RT.

• Supports flash mode: E TTL, M, MULTI, High Speed Sync (HSS)
• Supports remote shutter release function, test flash
• Supports PC output interface
• Supports USB firmware upgrade
• Supports single contact triggering
• Supports single contact flash triggering
• LCD Display

Specification

• Supports flash mode: E TTL, M, MULTI
• Supports remote shutter release function, test flash
• Supports PC output interface
• Supports USB firmware upgrade
• Supports single contact triggering
• Supports single contact flash triggering
• LCD Display

Compatibility

The compatible transmitter (master unit):

• YN-E3-RT
• YN600EX-RT
• ST-E3-RT
• 600EX-RT

Parts of the compatible E-TTL flash list:

• Canon 600EX( RT)
• 580EXII
• 430EX II
• Yongnuo YN568EX(II)
• YN565C
• YN468C(II)
• YN467C(II)
• YN465C

The PocketWizard MiniTT1 E-TTL Transmitter is Canon only and includes 4 x PlusX E-TTL Receivers.

With its low profile design, you can use the MiniTT1 Transmitter on camera to trigger remote E-TTL speedlites or studio flashes attached to FlexTT5 Transceivers.

Place TTL or manual flashes anywhere to illuminate the scene: Around corners, out-of-sight and in bright sunlight. The MiniTT1 is compatible with any PocketWizard radio for triggering manual flash or remote cameras.

FULL FEATURE DESCRIPTION:

ControlTL™

PocketWizard’s firmware platform taps into the camera’s digital communications to enable an entirely new level of remote flash capability through our proven radio system.   ControlTL allows remote TTL for Canon E-TTL II systems as well as Manual Power Control.  ControlTL firmware is configurable and upgradeable for “future-proof” continuous improvement.  Find more details on ControlTL here.

Dedicated E-TTL II Triggering

Locking your MiniTTI Transmitter into the hot shoe of a Canon DSLR camera and mounting E-TTL II flashes onto FlexTT5 Transceivers gives you full autoflash exposure control with the freedom and reliability of a PocketWizard radio.  There are no special settings to make or modes to call up.  Use the camera, on-camera flash or flash commander controls for flash compensation, zone and ratio control.

Manual Power Control

Adjust the manual power settings of your remote Canon Speedlites directly from a AC3 ZoneController, 580EX or 580EX II flash mounted on your on-camera MiniTT1 or FlexTT5.  You can independently control the power output of up to three remote groups of lights (you can have as many lights in each group as you want) from full power down to the lowest setting simply with the dials of the AC3 ZoneController or the user interface on the back of the 580 EX or 580 EX II flash.   Manual Power Control also works with select studio lights when paired with PowerST4, PowerMC2, or AC9/FlexTT5.  Now you can work with total control with your remote lights, without leaving your shooting position.

Optimized HSS

High Speed Sync takes Speedlite flash photography all the way to 1/8000th of a second sync.   ControlTL optimizes this amazing Canon feature and provides more light (which equals greater working distance), faster recycling times and more flashes per battery set when shooting in Canon’s HSS/FP Flash mode. Use this feature to shoot wide open in bright sun for amazing results.

HyperSync™

Our patent pending HyperSync technology allows photographers to achieve faster X-sync speeds, sometimes up to 1/8000 of a second, with full power flash.  Now you can cut the ambient light and use wide-open apertures, outdoors in bright sunlight.  HyperSync automatically adjusts the timing of your flash trigger so that faster than X-sync speeds can be achieved.  With certain Canon camera and flash combinations, you can achieve sync all the way to 1/8000th of a second.  Just imagine what you can do using flash in bright sun with wide open apertures and fast shutter speeds.  Since HyperSync is a trigger function you can use any PocketWizard Receiver including the FlexTT5, PlusX, Plus III, Plus II or MultiMAX.  HyperSync works optimally with Studio flash.  See Optimized HSS for higher than XSync speeds with Speedlights,

Please visit http://wiki.pocketwizard.com/hyperSync for configuring HyperSync.   While performance varies by the camera and flash equipment being used, HyperSync will get the maximum possible out of any set-up.

HyperSync™ Automation

HyperSync Automation adjusts HyperSync timing in two separate places – on the transmitter and on the receiving ControlTL radio. The transmitting or on-camera MiniTT1 or FlexTT5 automatically adjusts HyperSync to compensate for changes made to shutter speed. Photographers can further refine HyperSync via the PocketWizard Utility.  For more information on Configuring HyperSync Automation, visit the HyperSync section of the PocketWizard Wiki.

High Speed Sync (HSS or FP Sync) Disable Mode

Select either HSS Sync or HyperSync™ at shutter speeds at or over 1/640.  This allows you to use HyperSync and the benefit of full power flash all the way up to 1/8000 with certain flash systems.

Optimized Rear Curtain Sync

Precise rear curtain sync capability is engaged automatically, no buttons to press. Set the shutter speed at which rear curtain sync is engaged with the PocketWizard Utility. Capture natural light trails with sharp exposures at the end – no “after trails!”

Pre-Flash Boost

In some E-TTL situations, including shooting in full sun, over long distance or using diffusers or bounce flash, the normal pre-flash is simply not enough for the camera to see.  With Pre-Flash Boost, the pre-flash is two stops brighter.  This will approximately double the working distance of E-TTL II, compensating for the light loss when defusing or bouncing.

PowerTracking

When working with the PowerST4, PowerMC2 and AC9/FlexTT5 paired with compatible manual flashes, you can change any of your settings on your camera and the system adjusts for those changes.  Change your exposure compensation to adjust the exposure or make adjustments in aperture or ISO and the system balances your flash for proper exposure.

ZoneControl

Add the AC3 ZoneController on top of your MiniTT1 and gain three zones of power control right from the camera’s position. Works in both auto/E-TTL II and manual. Shut down an entire zone with the flick of a switch.

SpeedCycler with an AC3 ZoneController

Previously only seen with PocketWizard’s MultiMAX radios, this new mode is designed to rapidly cycle through multiple flash units fired individually in sequence. This allows photographers to fire a camera in sync with flashes faster than a single flash unit can recycle. It can also be used for triggering remote cameras sequentially. SpeedCycler is engaged on a transmitting MiniTT1 or FlexTT5 via the PocketWizard Utility.
SpeedCycler mode requires an AC3 ZoneController in the top hot-shoe of the on-camera PocketWizard radio. Zones A, B, and C will be triggered sequentially and individual zones can be disabled by setting the AC3’s Zone Switch to the off position. Both TTL and manual flash controls are supported.

Flash Power Control without a Camera

Photographers can now take their AC3 and transmitting radio off-camera and use it to set power levels for any flash with a ControlTL receiver, making it more convenient to use an optically triggered light meter, or control the power levels with just a MiniTT1/FlexTT5 and AC3 in their hand while another photographer takes the pictures.  Previously, an AC3 ZoneController on a MiniTT1 or FlexTT5 needed to be on camera to send manual power levels to remote flashes. Now, when connected to a MiniTT1 or FlexTT5, manual power levels are transmitted to remote flashes when the TEST button is pressed even when the transmitter is off the camera. This affects both speedlights connected to receiving FlexTT5s and larger flashes like AlienBees and Elinchrom RX units with ControlTL receivers.

Continuous Fast FPS

Radios work a lot fast then infrared communications allowing you to shoot with remote flash in E-TTL as speeds close to your maximum frames per second.  Never before have you been able to shoot remote E-TTL non-stop in continuous high-speed mode. Fill the buffer! Nothing else comes close.

Built-in Hot Shoe

Lock your Canon flash into the FlexTT5’s dedicated hot shoe and combine your remote flash with on-camera flash or use the on-camera flash for additional E-TTL II or Manual Power Control only.  The metal and glass reinforced resin hot shoe assembly is a superstructure onto itself and incredibly durable.  The best part; no more cords.

Basic Trigger Mode

Allows the MiniTT1 or FlexTT5 to work as a transmitter on ANY camera it will fit.  Anyone looking for the small form factor of the MiniTT1 can use it on other DSLR’s, SLR’s or even medium format cameras with standard hot shoes. The MiniTT1 and FlexTT5 are completely reverse compatible with all previous PocketWizards so they will work with whatever PocketWizards you already own.

PocketWizard Compatible

The MiniTT1 operates on the same channels as all other PocketWizards and will work with any unit you may already have.

PocketWizard Utility – Programmable and Upgradeable

Use the supplied PocketWizard Utility software with the on-board USB port to program the MiniTT1 to any PocketWizard channel and zone as well as many other custom settings.  The MiniTT1 can be upgraded whenever updates and feature enhancements are available (many planned!).

Channels / Learn Mode

The MiniTT1 has two channel configuration settings; C1 and C2. Each can be programmed as needed with up to 20 ControlTL channels* for TTL photography or Manual Power Control, or 32 standard channels** for manual flash photography.   Channels can be configured with the PocketWizard utility or use the Learn function to quickly program channels, or the reset function to configure back to factory settings.
* – 20 ControlTL channels for FCC/IC 344 MHz radios and three ControlTL channels for CE 433 MHz radios.
** – 32 Standard channels for FCC/IC 344 MHz radios and 35 Standard channels for CE 433 MHz radios.

Automatic HSS Trigger Timing for Manual Flash

This allows you to mix a manual flash with an E-TTL II flash in HSS/FP Sync shots at 1/640 and above with certain flash systems.

Auto Trigger Select for ControlTL

The hot shoe on both the MiniTT1 and Flex TT5 will trigger just about any hot shoe flash placed into it in addition to the Canon Speedlite’s it is designed for.  Yes, you can now fire just about any hot shoe flash including Vivatar, Nikon, etc., in  manual mode only and not TTL mode. (max trigger voltage < 50V, use P2 port for up to 200V)

Low-Profile Design

The MiniTT1 Transmitter is the smallest PocketWizard ever, utilizing an internal antenna and common coin-cell battery.  At just 2.3oz (65 grams) you barely realize it’s on the camera. 

Power Saver

The MiniTT1 Transmitter will go to sleep 10 seconds after your camera does to conserve energy.  Just touch the shutter button half way to wake both the camera and the MiniTT1.  It works on the supplied CR2450 coin cell battery (or optional CR2354 for in the field options) that provide hundreds of hours of battery life.

NOTE – These triggers are only compatible with certain cameras. It is not our responsibility to determine this issue with you, please go to www.pocketwizard.com to check if your equipment is compatible. Further, certain lights are limited in their hypersync capability. Flashes with shorter flash durations are more suitable to hypersync speeds. Our 1500w Bowens are general capable of speeds up to around 1/4000 sec. A canon 580 speedlite is generally able to produce speeds around 1/8000sec using the mini TT1 between the camera hotshoe and the flash.

SMDV FlashWave-III (Set of RX+TX)
The premium-quality Flash Wave III Radio Slave Kit is essential for the pro photographer on-the-go. It is versatile and reliable to be used for portable flash units, as well as a strobe unit. The transmitter is powered by 1- CR2450 Lithium Battery, sends 2.4 GHz sign to trigger slaved Flash Wave III RX receiver. It features 16 selectable and encrypted channels, ranges up to 700 feet, far enough for most of the applications. The transmitter can be mounted directly on to a standard hot shoe or via a PC Sync cable (included). The receiver can be mounted directly on to mounted directly on to a tripod or light stand.

HIGHLIGHTS
Premium-grade with metal reinforcement
Metal hot shoe mount
2.4 Ghz with 16 encryptable channels

FlashWave-III has 16 digitally coded channels available so you can even work at events with other photographers without flash or radio interference. You can trigger as many flashes or cameras as you like from a single transmitter, as long as they’re all on the same frequency and have this FlashWave-III receiver. Flash sync speeds of up to 1/250 second are possible. Combine this receiver with a camera release cable to match your particular camera model and you can use the FlashWave-III system as a wireless camera remote control.

FlashWave-III receiver operates on 2x AA batteries. The FlashWave-III system is not designed to perform in TTL mode with flash units – the flash must be set to Manual Mode.

FlashWave-III system is one of the most compact and reliable flash slave (flash trigger) system available. With the hot shoe built in to the receiver unit, there is no need to buy or carry any cables, adapters or accessories. Simple and reliable!

SPECS
SKU#: NG-SM-FT-FW3-S
Activity: Photography, Studio Shoots, Wedding Shoots, Casual Photography, Hobby Photography, Outdoor Portrait Shoots
Weight (kgs): 0.5000
Material: Plastic with Metal Reinforcement
Color: Black
Brand: SMDV
Manufacturer: SMDV, Busan, Korea
Warranty: 1 Year Limited Warranty
Country of Manufacture:South Korea

NOTE: All the above information is courtesy of the www.allgain.com.au website and the www.videolinks.com website. Gold Coast Camera Hire is not responsible for any differences in information above and the actual rented product. Gold Coast Camera Hire has taken all reasonable steps to ensure the accuracy of the information provided.

Kit includes:

• Softbox For Light Storm 120, 300 + Amaran 100D & 200D LED Lights
• Includes 40° Fabric Grid
• Gel Holder
• Silver Interior for Maximum Output
• Carry Case

Designed for light weight and portability, the 21.5inc Light Dome Mini II is compatible with the Aputure Light Storm 120 and 300 Series LED lights, and in fact, any LED light with a Bowens front accessory mount. The sturdily built modifier has 16 wear-resistant Hadfield steel rods that form a circular field of light that yields wide coverage and pleasing, natural-looking catchlights in the eyes of your subject, while maximising output with its reflective silver interior. To provide further control, Aputure includes a 40° fabric grid, which eliminates spill light but most importantly, gives you directional control of the soft source for selective lighting or dramatic effects. A filter holder is included as well, for creative colour.

Key Features:

• Soft Wrap-Around Quality of Light
• Included Fabric Grid Adds Control
• Fits All Godox Full Size Flash Heads
• S-Type and Bowens Mount for wide compatibility

This softbox is widely used with a light stand which provides a great support and with a strobe light for producing even and bright lights during portrait video shooting.

It comes with reflective silver interior for making it easy to achieve magnificent specular highlights, bring out sharp details.

Removable internal diffuser and external diffuser allow you to soften the light while lowering exposure by 2.1 stop; different levels softness can be controlled.

Gridded outer diffuser shield added is used to control light spill and tighten the total coverage area; this can be particularly helpful in tight shooting environments.

Easy to use like an umbrella with no hassles in opening and closing.

Perfect to be used as filling light to provide the most appropriate light in portrait product photography, live streaming.

Diameter: 48 inches/122 centimeters

Kit Includes:

1 x Deep Parabolic Softbox

1 x Internal Diffuser

1 x External Diffuser

1 x Eggcrate Grid

1 x Reversible Deflection Cap Disk

1 x Carrying Case

Ideal for use overhead or to raise the ambient illumination level, the 26”/60cm diameter Lantern Softbox from Aputure has the same omni-directional quality of light as the ”China Balls” of yore but is built of durable materials and has accessories such as a skirt set to control the 270-degree beam spread. The Lantern has a Bowens mount that fits Aputure lights such as the 100d, 120d or 300d series, but it is also compatible with many other lights that use this popular mount.

This modifier includes the lantern, skirt and carry bag.

The White PLM™ umbrella can be used as a shoot-through, diffused light source or a soft, bounced light source. It provides a wide, unfocused spread of light covering a 150 degree area for close, low specularity lighting with large round catchlights and very soft shadows.

Features

White fabric for shoot-through or bounce useProvides unfocused lighting over a 150° areaProvides soft shadows with perfect round catchlightsEasy to use pop open umbrella style with 8mm rodLess than +/- 150K color temperature shiftMeticulously designed arc shape for even lightCompatible with all Paul C. Buff™ flash units or any flash unit that has an umbrella adapter that will support an 8mm umbrella rod.

Black Outer Cover

When used with the White PLM™, it eliminates unwanted back spill light, further maximizing the output in bounce mode. The black fabric fits over the back arc of the open umbrella. The fabric has silver spoke tip ends (to fit over the 16 spoke tips on the umbrella) and has a small center hole opening for the umbrella pole tip. Please note this fabric DOES NOT work with the SILVER PLM versions.

Front White Diffusion Cover

The White Front Diffusion Fabric is available for the corresponding size PLM™ umbrellas – for use with both the Soft Silver PLM™ and White PLM™ umbrellas. When used with the Soft Silver PLM™, the beam spread is widened and it becomes a superior bounced-light octabox with very even light across the surface. When used with the White PLM™, it produces a very soft, wide-angle bounced light source. The white fabric fits over the face of the open umbrella and has a center hole opening for the flash unit (with a drawstring to tighten around the face of the flash unit).

The Soft Silver PLM™ umbrella is perfect for everyday use with various subjects as it bounces the light from the flash unit, retaining high efficiency with a wide angle of coverage. The soft silver fabric produces a controlled, feathered falloff with very soft shadows, perfectly round catchlights and an added specular punch over the white PLM™ umbrellas.

Features

• Soft silver bounce interior with black exteriorHighly efficient output (4 times the output of a softbox)
• Controlled coverage with a feathered fall-off Provides soft feathered shadows with perfect round catchlights
• Easy to use pop open umbrella style with 8mm rod
• Less than +/- 150K color temperature shift
• Meticulously designed arc shape for even lightCompatible with all Paul C. Buff™ flash units or any flash unit that has an umbrella adapter that will support an 8mm umbrella rod.

Black Outer Cover

When used with the White PLM™, it eliminates unwanted back spill light, further maximizing the output in bounce mode. The black fabric fits over the back arc of the open umbrella. The fabric has silver spoke tip ends (to fit over the 16 spoke tips on the umbrella) and has a small center hole opening for the umbrella pole tip. Please note this fabric DOES NOT work with the SILVER PLM versions.

Front White Diffusion Cover

The White Front Diffusion Fabric is available for the corresponding size PLM™ umbrellas – for use with both the Soft Silver PLM™ and White PLM™ umbrellas. When used with the Soft Silver PLM™, the beam spread is widened and it becomes a superior bounced-light octabox with very even light across the surface. When used with the White PLM™, it produces a very soft, wide-angle bounced light source. The white fabric fits over the face of the open umbrella and has a center hole opening for the flash unit (with a drawstring to tighten around the face of the flash unit).

The White PLM™ umbrella can be used as a shoot-through, diffused light source or a soft, bounced light source. It provides a wide, unfocused spread of light covering a 150 degree area for close, low specularity lighting with large round catchlights and very soft shadows.

Features

White fabric for shoot-through or bounce useProvides unfocused lighting over a 150° areaProvides soft shadows with perfect round catchlightsEasy to use pop open umbrella style with 8mm rodLess than +/- 150K color temperature shiftMeticulously designed arc shape for even lightCompatible with all Paul C. Buff™ flash units or any flash unit that has an umbrella adapter that will support an 8mm umbrella rod.

Black Outer Cover

When used with the White PLM™, it eliminates unwanted back spill light, further maximizing the output in bounce mode. The black fabric fits over the back arc of the open umbrella. The fabric has silver spoke tip ends (to fit over the 16 spoke tips on the umbrella) and has a small center hole opening for the umbrella pole tip. Please note this fabric DOES NOT work with the SILVER PLM versions.

Front White Diffusion Cover

The White Front Diffusion Fabric is available for the corresponding size PLM™ umbrellas – for use with both the Soft Silver PLM™ and White PLM™ umbrellas. When used with the Soft Silver PLM™, the beam spread is widened and it becomes a superior bounced-light octabox with very even light across the surface. When used with the White PLM™, it produces a very soft, wide-angle bounced light source. The white fabric fits over the face of the open umbrella and has a center hole opening for the flash unit (with a drawstring to tighten around the face of the flash unit).

The Westcott 100cm Collapsible Soft Silver Umbrella provides quick and easy light softening with a slightly harder look than a white umbrella. This umbrella has a unique design that allows it to collapse into a very compact package that fits easily into a location case.

Sturdily built with fiberglass rods and a metal shaft, this umbrella is well-suited to portraiture, providing fill light and high key effects.

• The translucent white umbrella can be used either as a shoot through or bounce light to reduce shadows and produce an even, soft, low contrast light over a relatively large area.
• For shoot through, it allows approximately 50% light transmission.
• It acts like a very large softbox at a very low cost.
• Material: nylon material, aluminum shaft.
• Compatibility: suitable for all studio flashes.

• The translucent white umbrella can be used either as a shoot through or bounce light to reduce shadows and produce an even, soft, low contrast light over a relatively large area.
• For shoot through, it allows approximately 50% light transmission.
• It acts like a very large softbox at a very low cost.
• Material: nylon material, aluminum shaft.
• Compatibility: suitable for all studio flashes.

This Pro Beauty Dish from Godox bounces the light off a centrally-positioned deflector and is directed to fill its white reflector interior. The result is a low-contrast effect with soft highlights that can be made even softer with the included slip-on diffuser.

• Low-Contrast Effect
• Soft Highlights, Slip-On Diffuser
• Bowens Mount
• Center Deflector

This is available in its native Bowen\\\\’s mount, suitable for a wide variety of fixtures, or Balcar mount via an adapter, for use on our PCB Einstein studio strobes.

The 7 inch Standard Reflector from Godox is an aluminium modifier that can be used on its own or thanks to its specialised accessory hole, is compatible with umbrellas. The reflector is compatible with Godox AD600B and AD600BM flash heads as well as any other head that utilises this widely used mount.

Aputure Fresnel 2X Attachment

• 6 inch Lens Diameter
• Dual Lens Design Boosts Output
• Beam Spread Variable from 12 to 40°
• Exclusively for LS C120d, C120dII, C300d
• C120d II is Up to 14x Brighter with Lens

• Glass Fresnel Focuses 10 to 45 Degrees
• Bowens-S-Type Mount
• Includes Barndoors and Padded Carry Case

Employing the widely-compatible Bowens S-Type mount, the glass Fresnel Lens for Forza 300 and 500 from NanLite modifies the Forzas wide beam spread to a focusable spot (10°) to flood (45°) coverage. The lens includes metal 8-way barndoors to further control the light beam.

• Wirelessly Adjusts Brightness and Colour
• Can Adjust Soft/Hard Light
• DMX Address
• Wireless Control of Multiple Fixtures
• Compatible with NanLite Forza & PavoTubes
• Compatible with Luxpad Series Softpanels
• Compatible with Value & Pro Series Panels

The RC-1 Bi-Color Remote Controller from NanLite is a multi-function wireless control accessory that is especially valuable for adjusting lights that are positioned at a distance or hung overhead. The remote can adjust colour temperature, brightness from 0 to 100%, hard and soft quality of light, and DMX channel assignment on one or multiple lights. The remote is compatible with NanLite Forza, PavoTube, Luxpad Soft Panels, Value Series, and Pro Series LED panels.

NOTE: V-Mount Batteries are not included.

This V-Mount 2-Bay Battery Power Station from Aputure will power your Aputure Amran 100D, 200D, Light Storm 600d or Nova 300 light with an optional battery. It can also add to your shooting time if you use it with two batteries simultaneously mounted on the fixture.

• Uses 2x Optional NP-F750 Batteries
• Provides 1 Hour of Full Power Run Time
• 5/8 inch Receiver
• Retractable Feet for Independent Support

2x Manfrotto 051B Mini Compact Light Stand, 2.4m

3x Arri 050MKA, 2.6m

2x Lightpro Light Stand,  2.4m spring loaded 2-stage

The Kupo Folding Base Mini Stand is a combines the Kupo Backlite Base Stand with the Kupo Folding Mini Stand Pole to give you a variable height adjustment (22.4 – 33.5in) stand that is ideal for lighting backgrounds behind the subject. The base may be used alone with the included 5/8in stud for lighting from the floor.

Kit includes:

• Backlite Base Stand
• Folding Mini Pole
• 5/8in Spiggot

C-stands are primarily designed to hold grip products, they are an effective way of articulating the item they support using grip heads and arms.  C-Stands have a fast set up and are very multi-purpose.

The Matthews C-Stand Grip Head Kit: consists of a double riser sliding-leg C-Stand, a grip head, and a 40″ arm. The stand rises to a maximum height of 10.5′. The unique staggered leg design of a C-Stand allows it to be nested and placed extremely close to one another on a set. The top leg of the stand is independently adjustable.

• Independent sliding top leg adjustment for leveling on uneven terrain
• Grip head and arm allow for mounting and placement of gobos, small reflectors, and small light fixtures

Wescott Scrim Jim (Original) 8×8\\\\\\\\’ Overhead Kit

Kit includes:

• Scrim Jim Large 8×8\\\\\\\\’ (Original)
• 8×8\\\\\\\\’ 3/4 Diffusion Fabric
• 8×8\\\\\\\\’ Single Net (1 Stop)
• Carry Bag

Matthews Light Control Kit (Expanded)

Includes:

2 x Matthews Flag 18×24″ (46 x 61cm)

2 x Matthews Flag 24×36″ (61 x 91cm)

Matthews Open End Scrim White Artificial Silk 24×36″

Hire of any single flag, net, silk or cucoloris.

Matthews 24×36″ Flag

Single Matthews 18×24″ Small Flag

Sekonic L-758Cine DIGITALMASTER

The Sekonic L-758Cine DIGITALMASTER is the ultimate light-measuring tool for cinematographers, videographers as well as digital still shooters. Offering the most extensive range of fps (frames-per-second), cine shutter speeds, and shutter angle settings, it meets and excedes the demands of Professional Cinematographers as well as Professional Still Photographers. It is the first to offer a 1A’ parallax-free spot viewfinder with a digital display. A built-in retractable incident Lumisphere for standard or cosine corrected light readings, provides both hemispherical and narrow angle readings. The L-758Cine DUALMASTER will handle any lighting situation. It offers foot-candle, lux, foot-lambert and cd/m2 measuring modes plus cine shutter speeds from 1 to 1000 fps and shutter angle settings from 1o to 270o.

FEATURES:

• Spot with Digital Display
  The L-758Cine DIGITALMASTER features a rectangular 1o parallax-free spot viewfinder. In dim or bright light situations, the L-758Cine DIGITALMASTER’s spot viewfinder displays shutter speeds, aperture and more. The built-in spot meter measures both reflected ambient, flash or combined lighting. The optical finder also features an eyepiece with an adjustable diopter.
• Shutter Angle
  1o to 10o in 1o increments, from 15o to 270o in 5o increments plus 12o, 17o, 22o, 144o and 172o individual settings
• Cine Speeds 1 thru 1000 fps. (frames per second)
• Analog f/stop Display
  f/0.5 to f/45 (in 1/3 steps)
• Light Measurement Modes
  Footcandle 0.10 to 180,000
  Lux 0.63 to 190,000
  Cd/m2 0.25 to 190,000
  Foot-lambert 0.07 to 190,000
  Ambient EV (Incident) EV -2 to EV 22.9
  Ambient EV (Reflected) EV 1 to EV 24.4 (with 1o spot viewfinder) Flash (Incident) f/0.5 to f/161.2 Flash (Reflected) f/2.0 to f/161.2
• Filter Compensation Settings
  Selectable on ISO 2: 85, -n3, -n6, -n9, -A3, -A6, -A9 or +/- 5.0EV in 1/10 step increments for Incident and Reflected independently
• Optional Plug-in Radio Transmitter Module
  Electronic flash units and/or cameras can be triggered wirelessly with the optional plug-in digital radio Transmitter module (compatible with all PocketWizard Digital Radios).Simultaneous triggering and measuring of flash units up to 100 feet away is possible. With its new easy-to-use Selective Quad-Triggering control (4 zone lighting control), the L-758Cine DUALMASTER offers quick selection of which flash unit to trigger and measure independently with a touch of a key. Now you can individually measure several flash units wirelessly by the touch of the meter’s measuring button, without walking over to each light and turning it on or off.
• Memory Mode
  Up to nine readings can be memorized and displayed on the analog scale independently in incident or spot metering modes in both Aperture and Shutter Priority Modes. Using Memory recall and clear, you may review all memorized readings individually on main display and selectively delete individual readings, or clear all simultaneously.
• Full, 1/2 or 1/3-step Selectable Readings
  Both shutter speeds and apertures can be displayed in either full, 1/2 or 1/3-step increments plus 1/10 stop units to match your film or digital camera; selecting these increments is quick and easy with custom software menu settings.
• Exposure and Calibration Compensation
  Independent incident and reflected exposure compensation