Gold Coast Camera Hire

Hollyland Mars 400s + F5 Pro Monitor Kit

The Mars 400S from Hollyland is an entry-level 1080p60 transmitter/receiver system featuring a 400 foot line-of-sight transmission range. In a compact design, the transmitter and receiver each have an SDI and HDMI connection. The choice between the two connection types expands your compatibility options and also lets you grow in case currently you only need one.

Additionally, an optional second receiver can be linked up to the transmitter to accept the signal at the same time. The transmitter is also capable of sending the signal over built-in Wi-Fi to up to four mobile devices, whether it is also sending to a receiver at the time or not. This will allow different people/departments on the set to view the image being captured. The image is sent to the HollyView app, which is compatible with iOS and Android.

Both the transmitter and receiver have a built-in L-series battery plate and also support DC power. Batteries are sold separately. One power adapter is included to get you started on the receiver end. Both units also have an OLED display that confirms the resolution, transmission channel, signal strength, and other details. The display also shows a low battery warning when there are about 30 minutes of runtime left.

One of the features of the Mars 400 system is a channel scan function. Via the OLED display, you can see the status of each selectable transmission channel in the environment youre in. This feature lets you know which channels are good and which have interference. Another feature is scene mode selection, which allows you to select from three different scene modes as best suits your environment. The three modes let you prioritize between video quality, low latency, or a balance between the two.

The transmitter and receiver are each approximately 4.5 x 2.5inches and have a robust yet lightweight metal housing.

Key Features

  • Entry-level 1080p60 transmitter/receiver system
  • 400 foot line-of-sight transmission
  • SDI and HDMI input
  • SDI and HDMI output
  • Up to two receivers supported at the same time
  • Wi-Fi transmission to up to four mobile devices using iOS/Android HollyView app
  • Built-in L-series battery plates
  • OLED display
  • Low battery warning
  • Channel scan function
  • Scene mode selection

FeelWorld F5-PRO

Add a high-resolution monitor to your 4K camera with the F5 Pro 5.5\\\\” V2 4K HDMI IPS Touchscreen Monitor from FeelWorld. It features a 5.5\\\\” touchscreen display with 1920 x 1080 resolution, 1000:1 contrast ratio, and 500 cd/m² brightness. This V2 model has been updated to include 3D LUT support with four built-in LUT profiles, and up to 32 custom 3D LUTs can be loaded by the operator.

The F5 Pro V2 features a pinch-to-zoom touchscreen, which allows you to zoom in or out with a pinch gesture to view closer detail in your images. The monitor has an HDMI input and loop output, and it supports up to DCI 4K video signals, as well as a headphone output for audio monitoring. Via the internal menu, touchscreen functionality can be turned off to prevent accidental swipes and other touchscreen commands, and you can then use the buttons on top of the monitor. For accurate exposure, focus, and other characteristics, the F5 Pro V2 is loaded with monitoring features such as vectorscope, histogram, anamorphic mode, and audio level meters. Its 3D LUT support allows you to utilize its four built-in Log LUTs when you\\\\’re viewing Rec. 709 video, or you can upload up to 32 user LUTs using the USB input to utilize a variety of looks and camera formats.

Multiple power options consist of a DC barrel input port for an optional power adapter, a 5 VDC USB Type-C port for connecting a USB power bank, and an L-series battery plate on the rear. There\\\\’s also an 8.4 VDC barrel output port that allows you to power external devices such as cameras and accessories using a separately available cable. The monitor provides multiple 1/4\\\\”-20 mounting threads, so you can attach the monitor as best suits your needs. There\\\\’s one on the bottom, top, right, and middle rear. A 1/4\\\\”-20 to shoe mount tilt arm is included for attaching the monitor directly onto your camera and adjusting the tilt angle as needed. The tilt arm also offers an additional shoe mount on the side for mounting a mic or other accessory.

The F5 Pro V2 also comes with an installation bracket secured on the back that allows you to attach transmitters, converters, and other devices. Also included is a sun hood for better viewing in bright outdoor conditions.

Key Features

5.5\\\\” touchscreen display
1920 x 1080 screen resolution
V2 model supports four built-in 3D LUTs for Rec.709 video and custom user-loaded 3D LUTs via the USB port
Up to DCI 4K video input
500 cd/m² brightness
HDMI input and loop output
Headphone output
DC and USB Type-C power inputs
L-series battery plate
DC output
Four 1/4\\\\”-20 mounting threads
Bracket on the rear for attaching transmitters, converters, and other devices
Rec.709 color standard

Software Features

Brightness histogram
Peaking focus assist
False color
Zebra
Check field
Underscan/overscan
Anamorphic mode (1.3x, 2.0x)
Image flip (H, V, H/V)
Image freeze
Center marker
Screen marker (80%, 85%, 90%, 93%, 96%, 2.35:1)
Ratio marker (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1)
Color temperature adjustment
Nine grid
Zoom (4x, 9x, 16x)
Aspect ratio
Pixel-to-pixel
Zoom all
U/D zoom, L/R zoom
24 Hour Rate:
$132
Weekend Rate:
$231
Weekly Rate:
$528
0
Connecting
Please wait...
Send a message

Sorry, we aren't online at the moment. Leave a message.

Your name
* Email
* Describe your issue
Login now

Need more help? Save time by starting your support request online.

Your name
* Email
* Describe your issue
We're online!
Feedback

Help us help you better! Feel free to leave us any additional feedback.

How do you rate our support?